20 Most Recent NEC Electra Elite DTU 16D-2 Corded Phone Questions & Answers


Depends on what blinking light it is, but try feature and the button. If its the red led at the top of the phone, it is a voicemail. Could also be DND, try feature, 69, feature.

NEC Electra... | Answered on Jan 26, 2017


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

NEC Electra... | Answered on Jan 20, 2017


You have to change the rings from the voice mail server. If you don't know your way around the server, its best to get a local NEC tech although it is fairly simple to navigate. Depends on your skill. Typical default password for the server is NEC

NEC Electra... | Answered on Sep 14, 2016


Is your system in nite mode? Feature 80 Feature toggles from day mode to nite mode on the main reception phone, if you don't have a nite key.

NEC Electra... | Answered on Aug 29, 2016


Remove call forwarding to the voicemail pilot extension. Either forward it to somewhere else or don't set any forwarding and it'll just keep ringing.

NEC Electra... | Answered on Aug 29, 2016


Ringing is set up by the system programmer, so talk to the office manager about getting the vendor to do this.

NEC Electra... | Answered on Aug 29, 2016


The system administrator has access to the voice mail part of the system, can go in and select the bin where the message is saved, then re-record it.

NEC Electra... | Answered on Aug 29, 2016


If you recently dialed 4-0 or 4-1, those are Do Not Disturb and Call Forward codes. if this is what happened, then dial the cancel code for both, which is 4-2. This is with internal dial tone, don't grab an outside to do this. You could have someone dial your extension to test if the ringer is faulty. if their call comes in as voice announce, have them add a 1 to their dial sequence and their call should switch to audible ring, and you will know it's not a ringer issue. Adding a 1 can be done continuously if you want to switch back and forth.

NEC Electra... | Answered on Aug 29, 2016


it has to be setup in PABX programming. Your PABX admin can do this

NEC Electra... | Answered on Apr 27, 2016


Hi Fallon, while on the middle of conversation, please check the LCD display of your digital phone, you will see "voice call" then press the button for direct talking.

NEC Electra... | Answered on Oct 01, 2015


Try Feature 69 then feature. The phone might be set to DND

NEC Electra... | Answered on Aug 07, 2015


it depends on your type of phone system. On an Elite IPK system you need to enter program mode from x100 or x101 then goto function 4/18 per port and assign names. transfer key saves.

need help remote billable support at www.ldtsnj.com

NEC Electra... | Answered on Mar 31, 2015


Hello, That would be a system ring group programming feature. It would depend on the type of phone system you have. NEC Elite 192, Elite IPK, Elite IPK 2. There are different platforms and this would determine how to program it.

NEC Electra... | Answered on Mar 04, 2015


  1. Press the Function (FNC) button.

  2. Press the speed dial button you want to program.

  3. Dial the number.

  4. Press the Function (FNC) button to set the number.

  5. The message Speed Dial Set (SPD SET) displays, indicating that the speed dial button is now programmed.


NEC telephone user guide Thunderbird School of Global Management IT Help

NEC Electra... | Answered on Nov 13, 2014

Not finding what you are looking for?
NEC Electra Elite DTU 16D-2 Corded Phone Logo

365 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Ekse

Level 3 Expert

13434 Answers

Norman Al-Anbar

Level 3 Expert

630 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NEC Lands Phones

  • NEC Lands Phones

Most Popular Question

change names stations

  • Lands Phones
Loading...