Canon PIXMA iP 1500 does not print

To print the LAN settings, press the Maintenance catch on the printer over and over unti you see a n on the LED, then press the Black or Color catch. When it prints out, let us know whether the association is Active or Inactive. On the off chance that it is Active, please let us comprehend what it appears for the IP Address and Default Gateway. If you want to get proper detailed information then 'you should call on 1-888-924-2961 toll free number anytime for canon printer support service. Technical Support For Canon Printer

it may have reached its limit. these printers have counters. you will need to take it to canon for a reset.

If the orange lamp blinking only it's the print head is not installed, or it is not properly installed.Open the cover remove the print cartridges then remove the print head and put back it on.If not help the print head is defective and need replace.
If the orange lamp blinking with green alternately it's ASF (cam) sensor error.The problem is in sheet feed unit.

Sounds like you need a new printhead.
QY6-0054-000. around $40.00

solution already posted here: http://www.fixya.com/support/t471118-canon_ip_pixma_1500

Here:
http://www.precisionroller.com/k_canon_pixma_ip-1500_print_head/m114d6666c104/

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

hereis the URL to buy this printer.

http://www.shopping.com/xPO-Canon-PIXMA-IP1500-CLR-PHOTO-PRNTR-18-13PPM-4800X1200-1088NOZZ-WIN-MAC

my printer say, "the ink absorber is full".

how can i reset canon pixma mp 110 tahnk you please help me

This is the REAL working method of manually resetting Canon ip1880 - ip 1980.

1. Unplug the POWER cord.
2. Press & hold the power button.
3. Connect the power cord WHILE holding the power button.
4. Keep on holding the power button for about 30 seconds.
5. Release the power button. The printer should be turned off.
6. Turn the printer on and that's it!

NOTE: You have to do this every time you turn on your printer. Or you will get the waste pad full error.

Hope this helps.
vulmec.wordpress.com