No electric my generator runs but the electric comes out

join ask here
Generac Air Cooled Generators - Ziller Electric Inc ' Interactive Generac Generator Forum

How to test your Electricity Generator AVR Brushes and Alternator on...

You need to run these tests in the video and come back to us with the results. Send your test results to us here: https://www.generatorguru.com/ask-the-guru/

Then we can tell you what the problem is :)

Do normal maintenance first, like oil, oil filter and air filter and then let it firts warm up before applying a load.

With the generator SHUT OFF - and NOT RUNNING, open up the covers and make sure all the electrical wires are connected. It sounds like one of the leads from the alternator has come loose.

have the saw motor checked for internal and wiring problems
check the start/run capacitor of the electric motor
running a 1 1/2 hp motor (1075 watts) on a generator that has a running wattage of around 2250 watts means that it should start and come to speed immediately if the motor is good
the problem indicates that there is a circuit problem in the saw motor that is exceeding the available wattage (3000 watts ) on start up

sounds like problem with c board still a problem

Make sure your generator is rated high enough to run you a/c. Also is you a/c 120v or 240v? Do you have it plugged into the right voltage?

Sometimes the generator loses the magnetic field that allows it to produce power. Do a Google search on "flashing a generator field". There are many ways to do it, but I would recommend doing some reading before trying it. Your "dead" generator could produce hazardous voltage once it comes back to life.

Also, before trying any of this, make sure the circuit breakers on the generator (if equipped) are not tripped.

Good luck and be careful!