A/C What is voltage setting on A/C adapter for HoMEDICS ss4000?

World Wide Input Voltage 100-240VAC 50/60Hz


https://www.amazon.com/UpBright-Homedics-10-motor-Programmable-Massager/dp/B013SPO1RG


https://www.amazon.com/UpBright-Homedics-10-motor-Programmable-Massager/dp/B013SPO1RG

Although the link below is for a BPA 200, it does show an AC adapter on page 9:

HoMedics BPA 200 User Manual Name function Of Each Part

Hi

Input: 120VAC 60Hz 35W
Output: 12VDC 1.6A

Source - http://www.ebay.com/itm/Homedics-AC-DC-Adapter-Model-ADP-8-D12-16-P-02-12V-1-6A-Power-Cord-Wall-Plug-/111507454421?pt=LH_DefaultDomain_0&hash=item19f65cb9d5

I hope this helps :)

This AC Adapter is available on Amazon @ http://amzn.com/B00ACNGMO8

Hope you find this information to be helpful.

hi: just buy AVR (automatic voltage regulator)
it has built in surge protector, and regulate AC voltage.


hope this help you

Hi,

The same case happned with me, I wrogly used it with 220V in India - my model is Homedics Shiatsu MCS-360H :-(

I can not see any thing burnt inside the chair ( I opened it and exmined ) but there is no light in attached remote - Kindly share the solution if you have any at [email protected]

Regards
Abhi

No longer available from Homedics. Just called them today and found this out.

I need that adapter (PP-ADPEM3). Not available from Homedics and have never seen it on Ebay. Care to sell it?

The SS4000-E  is a NAS storage server.  To the best of my knowledge it is not possible to put database files on a NAS.  They need to do on Direct Attached Storage.

@echo PLEASE WAIT, THIS MAY TAKE A MINUTE.
@ECHO PREPARING ROUTE FOR USING INTEL ATTACHED STORAGE
@ECHO MAY HAVE TO DO A MANUAL CLOSE AND DISCONNECT OF THE Z: DRIVE.
devcon enable "PCI\VEN_14E4&DEV_167A" <== modify for you
route delete 0.0.0.0 192.168.0.101
net use z: \\192.168.0.101\public storage /user:admin /persistent:yes