ML-350 G3 SERVER PROBLEMS TO RESTART,AUTOMATIC FIND PROBLEMS,

Open the case. Power up and look for internal LED that corresponds with warning light number 2 on main board.

Number 3 is power.

Hello, This could be many thing that causes this. 1. I would check the network properties to make sure the network ports are configured correclty. 2. Make sure the network services are turned on. 3. Make sure you have install the latest service pack for server 08 and your network drivers. Once done, reboot.

Good Luck
C2Solutions

PSU problems.?

why not ask on the real forum at HP?



https://h30434.www3.hp.com/

windows server 2003 enterprise edition with SP1 or SP2 , can detect
SCSI driver automatically.

compaq website

instead of using the KVM use ILO or a local keyboard monitor and mouse. Also try restarting the KVM module before powering up the server

Check if the processor fan is running properly. Also check the RAM modules, as these could sometime cause the machine to hang.

Check your events log to eliminate software issues. From a hardware point of view the unit could be overheating causing ASR to kick in

Clear System Event Log thru CMOS setup or the management software provided with server . The SEL is full that is the reason the error message

Well, what kind of problems?