SOURCE: Communication with scanner
You could take it apart and see if you can lubricate the shaft the the scanner sits on with some vasoline. If that doesn't it could be that the stepper motor that controls the scanner is going bad in it.
SOURCE: Goes through motions of scanning normally, but shows blank page
Epson PERFECTION 1670 AC Adapter driver download
SOURCE: Epson Perfection 1200 Scanner Driver Needed for Windows 7
I posted this for another user but i'll post it here too,
I remember looking for hours for a driver
for my Epson 1200 scanner back when I upgraded by dad to Vista 64 Bit,
eventually I found one. Just today I upgraded him to Windows 7 64 bit
and remembered I couldn't get it to work, luckily I was able to dig up
the driver I used for Vista 64. Worked great in Windows 7.
I
can't remember where I found it so I can't credit the person who made
the driver unfortunately, however i've uploaded it to Rapidshare for
you to download. Here is the link:
http://rapidshare.com/files/324940248/epsonScan_1.0_Per1200Win64eu.zip.html
Just open up the zip file and run the setup. :)
Hope this helps, Merry Christmas!
SOURCE: Installation. Downloaded software from Epson for
Here are some few things you might want to do:
If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b
SOURCE: Installation. Downloaded Windows 7 compatible
I would check to make sure the two shipping locks are unlocked. You can find them according to the photo I have attached. This should help out.
109 views
Usually answered in minutes!
×