NordicTrack A2350, console non-responsive

*Grin* I use to have this machine! It's a very old machine and may not be worth repairing. *tear* It sounds like the on/off switch is broken and un-responsive. The "Sped up and went crazy", part sounds Motherboard related. You never know; take it to a Authorized Brother repair shop motherboard....

Happy New Year!
Kelly
Embroidery Services
San Diego, CA

please proceed according with the chart attached. However adjust the REED SWITH , clean it, and test for open/faulty.
God bless you

get a new battery

plealse LUBE the deck belt + rollers bearing too . you must do it after 150 miles aprox.
2) adjust the REED switch see the diagram, clean it, test for open or faulty. Tight the connector very well.
God bless you

This happen because the lack of LUBE in the machine according with the instruction maintenance.
Please see the video and proceed according , LUBE the rollers bearing too.
God bless you

see the video and proceed according.
God bless you

http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitnes

sincerely. Please keep me in touch.

in the front of the treadmill orange switch

Hi


Thanks for using FixYa. If the light flashes, pauses, and then repeats. When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (light flashes, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry


Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

we asked some people and u had 2 press some button lolxt