Can't hear caller on cordless

Your mouth piece could be dead. Can you try to test with another set?.

Look to see if the Mute button (or Hold button) has been pressed. If so, press the Mute (or Hold) button again to turn it off. With Mute ON, you can hear what your caller is saying, but they can't hear you.

Sounds like you have a defective microphone in your handset. Maybe caused by dropping of phone or water damage. Try land line phone not cordless. Just to ensure that you can hear the caller and can be heard over your phone line.

If you can complete a call successfully go and purchase another cordless phone.

We just had the same problem with our AT&T 2462 hand sets. They simultaneously stopped transmitting, and though we could hear the caller, no one could hear us on the other end of the line. We unplugged the base from the power source, took the batteries out of the hand sets, waited 20 seconds, then plugged everything back in and they worked just fine. Hope this helps.

does anyone out there have a solution for peggy's problem? I have the same problem------Bob

I can not hear caller when phone is answered, but caller can hear me.

Try the "hard reboot". /1/ Unplug power from base station. /2/ Disconnect battery in each handset. /3/ Wait a few minutes. /4/ Reconnect battery. /5/ Re-plug-in power to base station. /6/ Place handset in base station, and wait a few minutes for it to recover.
You may have to reset time/date and/or the handset ##.

Hi Stephen,

Sorry for the belated reply.

You have a common "symptom", but it comes from everything from a cracks to bad components in different places on the phone, normally from very light to heavy physical damage, and/or a bad component or two. Not really a user fix, so I recommend you google "panasonic cordless repair center" and you will find a repair facility. Regards, CG

change the channels on the phone and reboot it

probly it fell or something the speaker needs replacing