Fault showing e1,possible faucet problem

CODES: The Express program light Keeps flashing quickly

MEANINGS: Longer inlet time

Possible Cause: Faucets is not opened, or water intake is restricted, or water pressure is to low.

Im wasim
I want repair automatic washing machine all companies how i can do it

fault E1 in manual states no inlet pressure. sometimes fault code shows if machine takes too long to fill. check for blockage in inlet pipe.

Check that you have tuned on the inlet water tap(faucet usa).

Hi
E1 means no inlet pressure. Sometimes fault code shows if machine takes too long to fill. Kindly check for blockage in inlet pipe. Also check if water inlet is not filling and check if the water outlet valve is opening and there is sufficient water pressure.

Please do rate the solution as "FixYa" and revert for any clarifications.
Thanks
Rylee

E1 indicated long filling time. Perhaps the inlet filter has clogged. Check the inlet pipe and tap(faucet in usa).

Ok I think I can really help you here.

This is your error code, sounds like it has problems filling, might also be blocked.

‘E1’ LONGER FILL TIME. FAUCET IS NOT OPENED.
Ensure that inlet hose is not
kinked or crushed.

Found the online manual for this model, it is a PDF file so you will need 'Adobe Reader' to read it. (click on link)
http://www.tlc-direct.co.uk/Technical/DataSheets/Baumatic_Manuals/BMBDW13.pdf

That should help you
Bri

error code E1 refers to "lack of water inlet pressure" the valve the elctrically lets in the water might be at fault

E1 error comes up when faucet is not opened. this is shown up when it takes longer filling time.
The solution for this is to ensure that the inlet hose is not kinked or crushed.

aye have same problem!? how did ya get it fixed if ya did thanks