I need to dwnload wireless driver without driver detective

You shouldn't need a driver for this software. Just plug it in. Driver not required for Windows XP, Windows Vista and Windows 7.

Please install new driver and get it downloaded here : www.siliconguide.com > Drivers > Printer > HP
www.opendrivers.com/.../hp-free-driver-download.html
www.brothersoft.com/downloads/hp-printer-driver.html
Jay nmpkh

Hi.

First ensure that the wireless adapter is turned on.

If the adapter is on and does not detect any network, reinstall wireless network adapter drivers. the drivers can be obtained using the link below.

Download drivers and software

Reinstalling driver software usually fixes the problem, if it does not it usually means that the internal adapter is defective, in that case you will need to use an external wireless adapter (USB).

uninstall. Then reboot pc..Plug in camera. When asked to find drivers, point to where you dwnloaded them

You don't need a CD to configure your Netgear wireless router.
Just connect a network cable to your computer's 10baseT port and the plug the other end of the cable into the Netgear's 10baseT port.
Assuming your network card driver has been installed, configured and working, boot up your computer, and start your browser and enter this address http://192.168.0.1 Then enter the
user login = admin
password = admin
This enters you into the various configuration pages.

If you have changed the login and password and don't remember them, then you can reset the router to the factory defaults by the following steps.
Power off the Netgear, press and hold the reset button (you need a sharp pointer) on the back of the router, then power up the Netgear router, wait seveal seconds until the LEDs stop flashing, then release the reset button.

You can always find the Drivers to any kind of printer or hardware if you just google it. just go Lexmark 3500 series and look for the words Driver or Drivers Download and this is the most important part so listen up, make sure you download the right drivers the ones that coincide with your printer. Its that easy and let me know how it goes alright have fun

lost my set up disk so would not connect linksys wireless b 2.4 ghz 802.11b usb network adaptor
need to dwnload disk drive for linksys wireless b 2.4 ghz 802.11b usb network adaptor

Dearest crystal 7, you prombally need to reset your windows
wireless. go to add and remove and remove the wireless
drivers the reboot your computer and the reinstall your wireless driver ,then go to the control panel go to internet options then to connetions then scrow down to lan settings the put a check in atuomatically detect settings the apply then ok . the reboot your computer then set up your wireless for connections for your house and it should work ...... lala linda

Right click on My Computer and go to device properties and see if the wireless card is listed in the devices.
If not you will have to install the drivers for the wireless network device. You can find them at there website.

you need to ensure that the drivers are correctly installed, go to the manufacturer's website, download & install the latest drivers, Then go into Device manager, and look for any items in "other devices", delete these devices and try to redetect, (check for changes)