Washing machine i am wanting to know, if you can tell me how to fix a sercevigna washing machine. It functions but not properly.

Check the outlet pipe and pump/filter is not blocked.

That sounds like a Control board issue. They are expensive do you need proper diagnosis, rather than just changing it.

Try a reset first.

i want to know how to restart a defy automatic washing machine

https://satechhelp.co.za > i-want-to-know-how-to-restart...
Mar 7, 2019 - 1 Answer · Unplug the washer for at least 5 minutes · Before you plug it back press and hold the stop/cancel button for 15 seconds. · Let us know.
1 answer · Top answer: Hello If the washer does not have a reset button' try the following • Unp

..

What to do when Samsung Washing Machine does not spin ?

www.samsung.com/ae/support/skp/faq/1033383

Samsung Electronics'Washing machine not spinning' is one of the major problems faced by people nowadays with ... If so, the washing machine can't spin and may not function at all.

How To Fix A Washing Machine That Is Not Spinning or ...

removeandreplace.com/.../washing-machine-or-washer-dryer-is-not-spin...

May 13, 2013 - Washing Machine Service Repair Manuals Online Your washing machine is not working properly. It does not spin, won't drain, can't turn on, ...

How to Fix Washer That Won't Spin ' Washing Machine Repair

Check to see if the machine has touched the on off tap at the back during spinning and cut off water supply.Or check the penny trap at the bottom of machine.if both are okay the it is likely to be down to faulty board or impeller motor which helps the flow of water into machine.

Do an extra long rinse with no load, make sure door sensor in pushed in properly, then module should sort out itself

INSIDE THE AGITATOR IS A PLASTIC GEAR AND SOME DOG EARS WHICH GRAB THE AGITATOR,,,USUALLY ITS THAT,,CALL YOUR LOCAL APPLIANCE PARTS STORE,TELL THEM THE BRAND AND THEY WILL KNOW JUST WHAT YOUR TALKING ABOUT AND YOU NEED,,ITS A SIMPLE FIX,,NO NEED FOR TECHNICIAN,,

instruction book http://imagebank.indesitcompany.co.uk/brochures_online/pdf/indesit/Laundry/WIXXL146-GB-Hires.pdf

yes you can force it off it's bad anyway so go for it and when you do get it off clean the rust off the shaft before you put the new one on. You are doing great.

Hi juanmapr,
The next step after checking the power would be to put the washer into the spin cycle and see if the machine will spin. This will tell you two things. 1 It will tell you that no water is coming in at the start of the wash cycle. 2. It will tell you if the rest of the parts are functioning properly.
If the machine will not spin when in the spin cycle and you do not hear the motor turning then you may have a bad timer.
If the machine will spin but when you start a wash cycle the water will not fill then you will need a new water inlet valve.
Please send me the model number and any other questions you may have if this does not fixYa and I can ship you any parts you may need for your repair. Or just let me know if you need a step by step how to do any repair, I am glad to help. Please dont forget to rate me.
Mike Anderson (Owner)
Anderson Appliance Repair
(865)945-3808

it may chick but still not work...Did you jump it ? if you need to know how to do it let me know...