My Sears Kenmore Dryer has stopped spinning!

SOURCE: Noise during high speed spin cycle

sounds like the bearings need replaced, when replacing bearings you need to replace all of them to ensure proper function and life longevity.

SOURCE: Dryer Squeaks

ok your having the begings of a rear bearing problem now let me tell you whats happing if you pull the dryer out and look about at the middle of where the drum is at the back then you will see a silver small rectangle peice in the middle of that is what looks like a small finger with a steel ball under it on the little ledge there should be a little pile of black dust the little finger is making the little ball cut into the back of the rear bearing but the rear bearing is still good now get you a little can of spray lithem grease clean the dust off turn the dryer on and spray that little ball till its coated then every time you hear it squel repeat the proceadure untill one day it wont stop then we will have to change it and on that day you better have some help lol

SOURCE: Kenmore front load washer

I had the same problem and it went on few months. Then the final spin didn't work and I could smell something buring. Called AHS and they sent a tech, who said it was the bearing. Cost about $350. to fix. Will be replacing the washer soon, I don't think we paid too much more than this at the scratch and dent place.

SOURCE: Kenmore Stacked Washer / Dryer Model Number 417.97802792

can the rear bearing on the drier be oiled/greased though the back casing, any easy way of stopping sqeek!

SOURCE: washer does not spin

You must replace the direct drive coupling between the motor and transmission. About $30.00