I cannot change the program on my viking dishwasher

It's possible that you have put the dishwasher into delay mode. Try powering off at the powerpoint as this will force a reset of all programming.



The pause/start button also sets the Delay Start feature which can delay the start of a wash program
from 1 to 12 hours.


To cancel Delay Start
Press the I button.

Hold the start/stop button down 5 to 10 sec to reset

Please check the user guide. There may be settings available like sleep timer in TV sets.

HI, this is a control fault. replace the control or timer module asap.

To cancel the delay and start the cycle, press START/RESUME.

I think that the delayed use is engaged.  Wait an hour, and it will probably start up on its own.

NEED TO CHANGE THE ELECTRIC TAP IN THE BACK OF THE DISHWASHER.
THE TAP IS WHAT THE WATER HOSE CONECTS TO AT THE BACK OF THE MACHINE.

1.Position the rotary switch to reset.
2.Press the RH button, with the clockface on it, once for every hour of delay required. The display will change to 1H, 2H etc.
3. reposition the rotary switch to the number of the required program.
4.Washer will start program after the selected number of hours.
NB. If you select too many hours, cotinue to press button as display will count up to a maximum of 24H before retuning to zero again.

Goto this site www.northernparts.com they can help you out.

Would your start button be stuck? check to see if there is something keeping it pressed in? if not your control star button could be shorted...let me know