Question about Honda Black Max 2600 PSI Pressure Washer

1 Answer

Detergent won't go through siphoning tube

Attached tube to power washer and put other end in bottle of detergent. won't go through, and ended up with water going back into detergent bottle

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,468 Answers

It will only draw detergent with the large black nozzle or the nozzle wide open with not draw with high pressure

Posted on May 22, 2012

  • Michael Imparato
    Michael Imparato Apr 26, 2014

    I have same problem. Water filling detergent bottle at all pressure levels

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 68 Answers

SOURCE: Water coming out of where the hose goes into the washer.

Maybe just a worn o ring inside the hose where it connect to the washer.

Posted on Jun 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know where to put detergent in the pressure washer I have no model number


These units come with a detergent bottle that attaches to the spray wand. The manual describes what detergents to use and the attachment reduces the pressure and siphons the right amount of detergent from the container. It is not a good idea to try to run detergent through the pump.
Here is a link to the operating manual for a similar pressure washer.
http://www.ppe-pressure-washer-parts.com/files/1961581/uploaded/pw0501400.pdf.

Mar 05, 2015 | Coleman Powermate DuraBuilt 1400 PSI...

1 Answer

Where does the detergent bottle go


It goes onto the wand itself. With the Pressure Washer off: If you have the wand unattached from the hose it works easier. Then separate the WAND into two pieces at the big joint in the center. Insert the bottle into the joint on the opposite end of the section that will be attached to the hose, (once you have the wand in two pieces you will see the same types of connections that are on the bottle.) then attach the other end of the wand to the bottle. Now reattach the wand to the hose.

Dec 03, 2014 | Campbell Hausfeld PW1750 Electric Pressure...

1 Answer

Why the water is running from detergent siphoning tube?


The siphoning mechanism on almost all power washers use "The Venturi" effect to suck up the detergent. Basically, there's no pump...the force of the water passing the siphon hose causes a vacuum which draws the detergent up the tube. There's a small ball that is supposed to fall and block the tube when the trigger is released so it sounds like it got jammed up in there somehow. You could it apart and free it up but I would recommend just purchasing an external detergent dispenser. Home Depot carries them for about 15 bucks. They allow you to use soap with high pressure and bypass the always problematic siphon system.

Jun 08, 2014 | Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure...

2 Answers

Don't know how to get detergent into the ultimate x pressure washer (1500psi)


To the right of the Brass fitting where your garden hose attaches there is a small round plastic cover piece, pull on that and it will pull out a clear tube with it which goes into any container containing your detergent, it will pull the detergent as you use the pressure washer. Push the tube back in after you are done using it. You can also buy a replacement detergent bottle for other pressure washers if you wanted to.

Jun 05, 2011 | Garden

1 Answer

It is only one year old and only been used last summer when i got it out this spring the detergent will not dispense


take off clear tube that goes into solution jug(where soap goes),make sure it is clear(water passes thru it easily) use a soda bottle- fill with vinegar- reattach hose and put other end in soda bottle- if this doesn't work that valve in the sprayer itself is gummed up- sometimes using HOT water feed sprayer will clear an internal plug

May 10, 2011 | Briggs & Stratton Prosumer 20324 Gas...

2 Answers

I have a Challenge GBV180 Garden Blower Vacuum. I can only get it to blow ..does this model vacuum and if so how do the bits attach ?


remove the blower tube by turning anticlockwise. remove cover from air inlet same way. attach large diameter suction tube to air inlet (has to fit correctly as this is where the safety switch is) attach collection bag to air exhaust opening (where you removed the blower tube from)

Oct 15, 2010 | Garden

1 Answer

Cannot attach wand after attaching the detergent holder


put the detergent holder on the end of the wand handle.take off the first section,and put bottle into that hole.my Nilfisk waterblaster is the same

Jul 05, 2010 | McCulloch FH140A Electric Pressure Washer

1 Answer

I have a detergent tank and cant seem to get detergent to come out what do I need to do?


Dear bug4222,
I have never worked on your type of machine. But generally this is what you do. Disconect the pipe from the inlet to the machine. Attach another pipe and put the other end in a bottle of water. Start machine and on low pressure see if the machine sucks water from the bottle. If this does not happen, try to service the inlet part at the machine. This usually it will have a ball-bearing as a non-return valve. This non-return valve sometimes gets stuck. If you see that you have solved the fault in the non-return valve, attach the detergent tank as it was, but instead of detergent, use water. You should always use low pressure. If all is OK, try some detergent. Always remember that after using detergent, always pass clear water from the detergent tank. If you leave detergent in the system, this will cause problems.
Regards,
Fultech.

Jul 16, 2009 | Campbell Hausfeld Garden

1 Answer

My TroyBilt Pressure Washer 2500 PSI 2.3 max gpm will not pull detergent through the tube. I have the correct tip on the nozzle and the tube connected to the pressure washer and in the bottle of detergent...


if you follow the chemical hose back to the pump it will be attached to a barbed nipple, behind the nipple there should be an o-ring, spring and a ball.
A lot of the time if you are using the proper nozzle in the low pressure setting and still cannot create suction the ball will be stuck to the o-ring. You can just free this up and put a little white grease on the o-ring.

Troy

Jul 08, 2009 | Briggs & Stratton Garden

2 Answers

B302 - unable to start detergent flowing - How should it work?


It will only pick up detergent if you use a low pressure detergent nozzle - or no nozzle at all. It also takes a while for the detergent to get to the nozzle.

Oct 18, 2007 | Karcher 2500 PSI Pressure Washer

Not finding what you are looking for?
Honda Black Max 2600 PSI Pressure Washer Logo

854 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Garden Experts

John Trevino

Level 3 Expert

1420 Answers

JOHN LAPIER

Level 3 Expert

2591 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you a Honda Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...