Ptid 8920 power acoustik error 4

From. My. Radio. Can. U. Show. M. What. Pin. Is. What. Color. Of. Wire. To. A. Power. Acoustic. Modelptid8920b

You should still have warranty and If so I would send it in for repair. The ribbon cable could be bad if it is a flip out style.Good Luck !

If you're still looking for help I have the same one and had the same issue. You have to push the eject button once and right after push and hold it and it will let you change the angle. You have to be really quick between the push and push and hold. If it opens, just close and try again.

you may have two cd`s inside take the radio out and take it apart. inside the radio there is a realese for the cd tray but you have to have power to the unit for it to work. eject the cd from the front then hit the release on the inside its a little tricky but you should be able to find it

hi, you may run a disc cleaner for the optic lens might be dirty, hope this helps

If you bought the correct cable it should work automatically. There are no settings. However, my 5300 was flakey right out of the box and I had to send it in for repair. It works perfectly now.

I HAVE THE SAME PROBLEM WITH MINE CAN SOMEONE
PLEASE HELP THANKS

HOOK IT TO THE GROUND WIRE (BLACK)

Ignore the above comment... SD cards and USB play fine on there (i have one).
Mine does the same, but leave it for 5-10 seconds after it says close and it loads it up!

What i did was get a switch from walmart. they cost less than 2 bucks...Get one that has 3 slots..1 for power, 1 for acc, 1 for ground. Plug the brake cord the acc, and splice the power and ground cords to the other two. When your switch is off you can watch video while you drive, when its on it will cut the video off and display that message.....

If you want to do it the right way, then plug it into the emergency brake line or the parking brake line...hope i helped