Web cam genius

down load split cam and install it from the site mentioned below run the software then connect your pc , open split cam from the progrrame, in split cam icon choose usb cam your cam shall work,
http://www.giveawayoftheday.com/freeware/usb/webcam-driver

thank you ,
domnickr

You can download the program which will install your VideoCAM Trek Web Cam here:

http://drivers.softpedia.com/progDownload/Genius-VideoCAM-Trek-Download-14449.html

Hope this helps! ^_^

1. Please install the driver first and then connect VideoCAM Trek to the USB port.

2. Installing the VideoCAM Trek driver
Windows Environment
a. Insert the VideoCAM Trek Installation CD into the CD-ROM drive.
b. The Autorun screen will bring up the installation screen. Click on
“Driver” then simply follow the on-screen instructions.
c. Install DirectX from the CD.
Notice: If the Autorun screen doesn’t start, please follow these
steps:
�� Click on “Start Menu”
�� Type D��\SETUP.EXE , then click Enter key.
(Assume your CD-ROM is in Drive D)
Mac Environment
a. Insert the VideoCAM Trek Installation CD into the CD-ROM
drive.
b. Double click on the CD-ROM driveglish
c. Click on the file folder of “VideoCAm Trek Driver OSX 1.0”
d. Click on “VideoCAM Trek Driver Install” then simply
follow the on-screen instructions.

3. Insert the VideoCAM Trek’s USB cable to your desktop’s or
laptop’s USB port.

4. Complete software and hardware installation. You can
install the software you would like to use for video
conferencing or chat with your friends.

Hope this helps! Let me know how you make out with it!

Get driver here:

http://www.centraldriver.net/driver.php?codigo=195

First go to: http://www.geniusnet.com/

Afterward navigate to Service & Support>Drivers. Now select the, "Product Line" listed as, "WebCAM." Afterward select the, "model" known as, "Video CAM EYE."

Afterward you will be taken to a page where you can download drivers to successfully install your web-cam.

no installer cd

try here for the drivers Download Genius VideoCAM EYE 2.0 Driver for Windows 9X/ME/NT/2K/XP/2003/Vista/XP X64/2008 - Softpedia



riz.

Download the installation package on the link below;

http://www.geniusnet.com.tw/geniusOnline/online.portal;jsessionid=L0jLkGRstnYFMhRfyjn1cyvP6hp2WfgR2R0MknNNJQd5Q1hN9hJZ!-422374284?_nfpb=true&productPortlet_actionOverride=%2Fportlets%2FproductArea%2Fproduct%2FquerySection&_windowLabel=productPortlet&productPortletproductId=30913&productPortletsectionId=220209&_pageLabel=productPage&test=portlet-action

necesitaría el cd de instalacióm de camara web modelo e-messenger 112 enviar por favor a [email protected]

Genius GF112 Model:Video CAM GF112 S/N 129866801958 made in china 12041366100-B

I lost de cd for this products, I like to have imformation about how to download a new software or get the nessesary driver for. please would you help me on it? If there is please send mi the information tu this mail address [email protected]