Basically it will do the whole cycle , however some times it finishes with the fast spin and other times it doesn;t, hence the washing is soaking when i take it out. has any1 got any soloution???
May need a new or reclaimed Motherboard / Circuit board,
if the pump and pipes are found to be clear.
Have you checked and cleaned the filter on the machine, usually located and the front near the bottom. If so then there is 2 other possibilities, either your water pump at the back of the machine is blocked or faulty, or it's the timer on the machine. A washer won't go into spin mode until it has drained all the water from the machine first. hence the pump has to run. Just remember to drain all the water from the machine before checking your filter otherwise it will end up on your floor.
672 views
Usually answered in minutes!
WMA56 does its wash cycle okay but gets stock on fast spin, the light just keeps flashing and clothes remain wet
×