POLAROID MODEL: TLA -03223BM TV WENT DARK, NEED TO REPLACE FLORESCENT LITE. PLEASE ADVISE!

Hello,

This is a very common issue with that model. There are filter capacitors on the power supply board that fail and keep the back light power section from starting up correctly so you get no picture on the screen. The FLX-1910 uses the same power supply board of the Polaroid TLA-01911, below is a link to information showing how to repair this power supply board.

http://www.ccl-la.com/blog/index.php/repairing-a-polaroid-tla-01911c-with-a-bad-power-supply/

http://elektrotricks.blogspot.com/
http://electrotechnician.blogspot.com/
http://electronicshelponline.blogspot.com/
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
Please visit these sites to get some details.

Thought that was going to be easy but Polaroid no longer have the manuals available for download on their site. Typical.

Anyway, here's a direct link to download your user manual (free):

http://www.hdtvreview.com/pdf/polaroid-tla-04641c-manual.pdf

Click the link, PDF will open in a new window. From there you can view, save and print. Please note your model number is actually TLA-04641C.

Please rate my solution if you find this helpful. Thanks.

It needs a video board replaced most likely. You can find by searching on google for your model. Might cost more than set is worth. Think about new model as they are really cheap in that small size.

check your LCD inverter maybe there is loss connection or some parts damage from inverter.

same (tla-01911c) issue when trying to watch over the air brodcast try rescanning the channels that normally works for me

i got direct tv basic set on my S-video input so i only need over the air when the sat is down (i.e: storms, wind, snow, ...)