Board: ECS M925 1.0 manual - PC Chips (M925G) Motherboard

There is a brief manual at HP website: HP Support Document
If you need PINs specification try here: FixYa - HP MCP61PM-HM motherboard diagram
Else you'll have to try contact ECS (board manufacturer) and ask them for the manual: ECS Web Site

Hi,
You could see that proper connections in the owners manual. If you don't have the manual, just type the boards type in any browser and download the manual!
Hope that helps u out!

Hi Jenkins21448,

I believe your mean PCChips M925. ECS didn't make a M925 board.
So you can find the PCChips bios and drivers HERE. If you download the manual there is a drawing of the motherboard for you to compare, to make sure you have the right drivers. But, you may be right that that board you have is extremely rare. I've never seen or heard of ECS making a M925. Check out the picture to be sure.

Thanks

Mark

http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=360&CategoryID=1&DetailName=Manual&MenuID=52&LanID=0 this link will take you to the manual for this board

http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=548&CategoryID=1&DetailName=Manual&MenuID=1&LanID=0

DOWNLOADS BIOS | Driver | Manual

Hi,
You can download the manual from:
http://www.ecs.com.tw/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=46&DetailName=Manual&DetailDesc=&CategoryID=1&MenuID=6&LanID=0

Hope this solves your problem.

Here is ECS website, I did a lookup and could not find the model. Check on the board itself it should have a socket type, the model.

http://www.ecs.com.tw/ECSWebSite/Index.aspx?MenuID=0&LanID=9

Drivers are at ECS site here:

http://www.ecs.com.tw/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=490&DetailName=New&DetailDesc=&CategoryID=1&MenuID=6&LanID=9

Your manual will tell you what the motherboard can support . If it a pre-manufactured motherboard ( A.K.A a dell , gateway , sony vio , HP .. ect ect ) then more than likely the answer is NO

Well you really need to get a manual for that. Check the website and download the manual with that model, for sure there is one.

I guess you have connected all the connectors there incorrectly so better look for a manual.