Hotpoint RVM1535MMSA Microwave Oven - Answered Questions & Fixed issues

unplug your microwave for a few min. plug back in.

Hi,

Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Basic Microwave Oven Troubleshooting Tips

heatman101

/-/-/-/-/-/-/-/-/-/-/-/-/-

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

kgkjf

Depending on the brand and full model number, it may.

There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting, testing, and locating components.

Also at our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

If you don't find yours, or if you want to look at it without disassembling the oven, you can download many brands' mini-manuals here.

Sometimes the problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid with aone year guarantee.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.

Brought microwave back to store. It didn't appear to be something I would be capable of fixing myself.
Got a new one which is working fine.

google your Hotpoint model number include parts, Dowsil is approved but is price prohibitive.

Could be a faulty control knob.

Yes you do indeed need a new door. The door is a complete safety unit and access to the microwave.

27 Litres

There is a chip that controls TOTAL operation of the microwave, sounds like it malfunctioned. It actually sound like the entire board has malfunctioned. good luck https://www.6ya.com/mrmmike

Many microwaves have similar issues. Usually, (not always) only the light is on and the fan is running, not the section that produces the microwaves. This problem can be caused by the door switches that are out of alignment or a defective control board.

Most microwave diodes will work just fine from system to system. The most common ones I use are rated at 550ma. When you check your old diode what made you think it was bad? They are such a high rating you will not get a reading on it with a regular ohm meter. Mostly on HV rectifiers if it is not shorted ( Zero Ohms) it is probably good. If you have no high voltage then substitute it and see if you do get high voltage, then you know it was open. Follow the video and give it a try.

"F3" means you have a shorting membrane keypad. I regularly repair these controllers and details are here. If you have other questions, it's best to follow up with me directly. (FixYa does not notify us directly when follow-ups are posted, so we have to log in to the site to see them.) - William E. Miller, AS-EET [email protected] http://www.microwavecontrol.com Microwave Oven Control Panel Repair Nationwide "Recycling by repairing since 1982"

None to my knowledge, but common faults include keypad failure (may show error code "F3") and cooktop light failure, both of which can be affordably repaired. (See link below) For more free DIY and other help & advice, feel free to contact me via my site below. Please include FULL model number*, FCC ID number*, + detailed symptom information. ( * on the tag in cooking cavity or around door frame or control frame or on back) William E. Miller, AS-EET http://www.microwavecontrol.com Microwave Oven Control Panel Repair Nationwide "Recycling by repairing since 1982"

JX-81J is the microwave recirculating charcoal filter for several models of GE and Hotpoint microwaves. The installation instructions will be available from the manufacturer with the model number of the microwave itself. One microwave that uses this filter is the RVM1535MMSA . See http://products.geappliances.com/ApplProducts/Dispatcher?REQUEST=HPSPECPAGE&Sku=RVM1535MMSA#tab1_ for all of the details on this microwave. The owner's manual, http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=39-40541-1.pdf , shows the installation of the filter on page 34. The guide for installing the microwave above the range is http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=39-40425.pdf . If you have a different microwave, add a comment with that model number. I hope this helps. Cindy Wells

It may be a bad connection on the fuse holder, an intermittent fuse, a bad connection on one of the thermostats or elsewhere, or a bad connection on the control circuit board. If you want to contact me privately with the model number, I can give you or a friend free DIY troubleshooting help and I also do microwave control circuit board repairs. For more free DIY and other help and advice, feel free to contact me via my site. Always include your FULL model number*, FCC ID number*, and detailed symptom information. * from the tag in the cooking cavity or elsewhere on the oven (or send a clear photo of tag) William E. Miller, AS-EET http://www.microwavecontrol.com Microwave Oven Control Panel Repair Nationwide "Recycling by repairing since 1982"

Have you tired unplugging the oven for 5 minutes (must be cool if you did a cleaning) and see if it will reset the system and unlock it.

The control buttons are likely defective. Is the MW working?

Can the safety switch is faulty. Try to repair it with a technician before use. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

All that is required to crack/break an item that is microwave safe is a fine crack or deep scratch. Water will expand so quickly as the microwave energy heats up the water, it turns to steam and cracks the plate with the pressure build up.