20 Most Recent
Polaroid 4226TLMB 42 in. LCD TV - Page 2 Questions & Answers
Screaming static
Try turning off different lights near the room or in the room that it is in. Our tv does that if the overhead light in our bedroom is on, it's a room right next to our living room.
6/27/2009 5:29:36 AM •
Polaroid...
•
Answered
on Jun 27, 2009
Screw size needed
I strongly advise and recommend you get the details and if possible the screws from the shop you got it from.
This advise is enssential so as to get the best from the certified sales representative
5/25/2009 3:53:45 PM •
Polaroid...
•
Answered
on May 25, 2009
Polaroid TV Code
Hello,
About the only thing you can do is do a code search. If it doesn't show up then, the remote does not have it (as with most tv/dvd or tv/vcr combos).
Turn the TV on manually. Then, push the switch at the top to the far right (to the TV position). Simultaneously press and hold the MUTE and SELECT buttons until the TV light at the top flashes. Release the buttons, then press and release 9, 9, 1. The TV button should flash again.
Press and release the 1 button again, then press and release the TV POWER button. Press and release the Channel UP button about once a second until the TV turns itself off. Press and release the select button, and you should be good to go.
If after a while, the TV button starts flashing rapidly, then there are no more codes to search, and the remote does not have the code, and you are stuck using 2 remotes..
Hope this helps...
2/23/2009 5:38:57 AM •
Polaroid...
•
Answered
on Feb 23, 2009
Making Verizon FIOS Compatible with my new TV
While not the ideal solution I have been using a Logitech Harmony remote for some time and I love it. You can set it up to work with any system and it is much more intuitive than a basic universal remote. This link lists most of the models available:
http://www.amazon.com/s/ref=nb_ss_e?url=search-alias%3Delectronics&field-keywords=logitech+harmony&x=0&y=0
Take Care,
-WN
7/24/2008 2:53:16 AM •
Polaroid...
•
Answered
on Jul 24, 2008
Polaroid TV working with constant red flashing light
If your Polaroid Roku TV is working fine but the red light is continuously flashing, it could indicate an issue that may need attention. Here are some steps you can try to troubleshoot the problem:
- Power Cycle:
- Turn off the TV and unplug it from the power source.
- Wait for at least 5 minutes.
- Plug the TV back in and turn it on.
- Check Remote Control:
- Ensure that there are no stuck buttons on the remote control. Press each button to make sure they are not stuck in the pressed position.
- Update Firmware:
- Check if there is a firmware update available for your TV. You can usually find this information in the TV's settings menu.
- Reset to Factory Settings:
- Perform a factory reset on your TV. This will erase your settings, so be sure to back up any important information first.
- Check for Physical Obstructions:
- Make sure there are no physical obstructions around the TV, particularly around the infrared sensor on the TV and the remote control.
- Contact Customer Support:
- If the issue persists and your TV is still under warranty, consider contacting Polaroid customer support for assistance. They may be able to provide additional troubleshooting steps or offer a solution.
- Professional Repair:
- If the TV is no longer under warranty and the issue persists, it might be advisable to consult a professional technician or a TV repair service to diagnose and fix the problem.
Always refer to your TV's user manual for specific instructions related to your model. If none of the above steps resolve the issue, it's recommended to seek assistance from the manufacturer or a qualified technician for further diagnosis and repair.
12/27/2023 10:15:57 PM •
Polaroid...
•
Answered
on Dec 27, 2023
How do I switch my Polaroid P40LED13 TV on to AV mode. No option in sources
If you are using the standard SNES cables with the round red, white and yellow 'Jack' plug connectors they are referred to as "Component" connections. On your remote there should be a button marked "COMP". It will probably be near the top of the remote near the Power button. This should switch the TV to the channel you need.
3/27/2023 9:22:04 PM •
Polaroid...
•
Answered
on Mar 27, 2023
Not finding what you are looking for?