Top 20
Lenovo 3000 C200 Notebook - Page 6 Questions & Answers
CD is not mapped and will not play CD? Is there a
try this step:
click start > type run (hit enter)> type regedit and click OK
click the arrow beside HKEY_LOCAL_MACHINE
click the arrow SYSTEM
click the arrow CURRENTCONTROLSET
click the arrow CONTROL
click the arrow CLASS
click the folder 4D36E965
remove the UpperFilters and LowerFilters on the right side of the registry.
Restart the PC and play the CD if it works...
It starts with the lenovo screen and then goes to
ok, press f8 key as the system is booting up, this will put you in safe mode,
if the system boots okay goto command prompt mode and type chkdsk /r to repair any files etc ,
Try booting up again, if the problem is the same then it a startup file that need repairing so goto safe mode, command prompt type bootcfg etc and try repairting it that way, us e the help command to point you in the right direction.
Regards
GeWiz
I have a problem with lenovo 3000 c200 laptop. its
open link and donload driver ....
http://www-307.ibm.com/pc/support/site.wss/product.do?template=/product.do?template=%2Fproductpage%2Flandingpages%2FproductPageLandingPage.vm&sitestyle=lenovo&brandind=10&familyind=338517&machineind=338521&modelind=0&partnumberind=0&subcategoryind=0&doctypeind=9&doccategoryind=0&operatingsystemind=49979&validate=true
but 1st uninstall oold driver after tht run it ...........
Lenovo button nor working
hi rone211, try this tip:
make sure you shut down the pc completely, wait for 30 seconds
press and hold the lenovo button for 5 seconds, if it does not come up
call this number 1-877-4-536686 for possible repair of your pc
Hope this help...
3000 c200 is dead and wont start up even though
Remove the battery and try to start the laptop. If the battery is totally down it may cause an issue even though it isn't supposed to. Also, check the voltage at the plug that connects to the laptop. A short at the plug will give you a warm power adapter but no power to the laptop.
Error 0701- usb over current on hc/port
This is not a big problem if the tablet works. There are three simple possible solutions to this problem:
1) Sometimes you can plug USB devices into a wall socket so you don't rely entirely on the USB power. See if the tablet can be attached to another power source - if so use the appropriate power adaptor to plug it into a wall socket.
2) Very few USB cables are designed to carry much current. This design keeps the USB cables thin and flexible. Try purchasing a USB cable that looks like it can carry the extra current. Unfortunately USB cable manufacturers do not display how much electrical current their cables can deliver efficiently, so you will need to guess. Generally the thicker cables can carry more current - these cables are *not* necessarily the expensive gold-plated ones. You can usually find a thick cheap one that will do the trick - but it will take a little experimentation. Try different thick USB cables to see if one makes the problem go away.
3) get a special USB cable that takes the power from 2 USB ports and delivers it to one device. These are strange looking USB cables that have an extra male adaptor cord hanging from a USB cable - the cable has 2 male adaptors and 1 female adaptor. Of course this will take up two USB slots on your USB hub.
Hope these help!
Touchpad processed while typing
Open the mouse control panel. Go to the touchpad settings. Set it to ignore taps while typing. On my Lenovo, it uses the ALPS Touchpad. For this one, the tab is "Tapping" and the option is "Tap off when typing".
Laptop shut downon its own
Your fan has failed! Your cooler not working properly, clean your cpu-fan. Your CPU is over-loading temperature is too high without an working fan! This is your Problem!
Black screen nothing loading
One of your driver is acting up. start in safe mode, disable one of the drivers (DVD or whatever) then close and try to start normally. If the PC starts then reinstall the driver.
Not finding what you are looking for?
