20 Most Recent
Uniden 5.8GHz Dual Cordless Phone - Page 3 Questions & Answers
Uniden Dect 6.0, the base keeps beeping
You have your answering machine set up to beep when you get a new message. Go through the menu for setting up the answering machine and turn that feature off.
We just installed ATT-uverse & our incoming calls don't work
I think you just need to turn the CIDCW on through the "Global Menu" The following is from the user's manual for the TRU8885.
Setting CIDCW (Caller ID on Call Waiting)
CIDCW sets the Caller ID on Call Waiting (CIDCW) displays the name and number of
an incoming call while you are on the line. Call Waiting Deluxe (CWDX) allows you
to handle call waiting calls in seven different ways.
1) Enter the Global Setup menu, and then the CIDCW
submenu (see "Entering the Menu" on page 16).
2) Press volume up/down to select CW On/CWD X O n, C W
On/CWD X O ff, or CW O ff/CW DX Off, and then press the
OK soft key. You will hear a confirmation tone.
I have a Uniden Integri sound Power Mac 5.8 ghz.
We have a similar problem with one of our handsets- except that in addition to the caller id, none of the other functions work. We've also noticed that we can get only about 10 mins of talk time on that particular handset before the battery goes dead. The manual says that if the battery is weak, none of the other functions on the phone will work (in order to conserve battery life). This seems to be our problem.
My uniden powermax 5.8 ghz set itself to Do Not Disturb.
The do not disturb feature (DND) allows you to mute the ringer, the base, and any registered handsets at the same time. The phone must be in standby mode. Press and hold do not disturb on the base. You will hear a confirmation tone, and the DND LED illuminates. To cancel the DND feature, press do not disturb again. You can also mute the ringer tone while the phone is ringing by pressing do not disturb on the base.
Activating the DND while the answering system is off will turn the answering system on automatically. The answering system setting will reset to the original setting when you cancel the DND.
If you press answer on/off when the DND and the answering system is on, both of the DND and the answering system will turn off.
To mute the ringer tone temporarily for each handset or the base, when the phone is ringing, press the MUTE soft key on the handset or the base. The ringer tone will return to the previous setting starting with the next incoming call.
My phone won't ring, but
Since you didn't specify the model of your phone, select it from the list beginning at
http://www.uniden.com/scat/cordlessphones_mnl
to get the manual to see how to change the ringer volume.
Why do you have
There has to be some action to tell the phone you're answering the call. Old phone did so when you picked up the handset. With this phone, you might have picked up the handset just to check the caller ID, so it won't answer the call upon removing the phone from the cradle. Besides, you might have picked up the phone to go out onto the patio or to the bathroom, for example. How is the phone then to know you want to answer a call?
Not finding what you are looking for?
