20 Most Recent Whirlpool Cabrio WTW6600SBT Top Load Washer - Page 3 Questions & Answers

Sounds like a bad lid switch

If you ever buy anything from Sears, always keep a warranty,we do and had to use it alot.

Allison, We are sorry to hear about your concerns in regards to your Washer. We would recommend balling up the clothing similar to the size of a soccer ball, and place around the agitator one at a time. We would also recommend stacking it up so it's around the sides and the agitator plate is visible with all of the clothing around it. Do not fill up past the 2nd to last row of holes in the basket to help overloading. The bulky cycle will allow more water to enter the tub, but will not spin on the highest spin setting. Since the washer uses less water than a traditional washer it makes it harder for it to remove excess detergent, and it can redeposit on the clothing. Use no more than 2 tablespoons per load, filling all the way to the top row or holes. Make sure the water heater is at 120°F, the best temperature to mix with cold water in. A lower temperature may not make the water hot enough, and the detergent will not dissolve properly. If you need any further assistance after trying these troubleshooting tips, please email us your address, phone number, the model and serial number, the website you were contacted on, Fixya, your review ID, and date of purchase to [email protected].

You need to replace your user interface board. Always order with the correct model number on the unit. This will eliminate you issues

faulty control board part # w10130544

CALL 18002531301 AND TELL THEM YOU HAVE THE F 1 CODE PROBLEM. THEY HAVEN'T CALLED THIS A RECALL, BUT THEY ARE CALLING IT A CUSTOMER AWARENESS PROBLEM.
WHIRLPOOL IS SENDING TECHNICIANS OUT NEXT DAY FREE OF CHARGE.
T W

Throw in with the clothes.

Brent60, We would like to inquire further about your post with you. Please respond back to this email address [email protected] with your name, user id (Brent60), phone number, street address, zip code, reviewer name, model & serial number, and date of purchase on the appliance.

Your problem is not with the washing machine. I suspect that the drain line for your toilet is obstructed further down the line than your snake can reach. If you have a clean out riser to your sewer system, flush the toilet while someone else is watching the flow past the clean out. I would say that renting a sewer line snake at a tool rental like Home Depot would solve your problem. Good luck

I just called Whirlpool...800-253-1301 in USA and a lovely lady informed that there is a recall on the Cabrio Whirlpool washer for the F1 code. We set an appointment and the service call and parts will be free to fix the issue.

doesnt belong in that machaine

Here is a diagram that may help you identify the hose. http://www.appliancepartspros.com/pump-parts-for-whirlpool-wtw6600sb0.html Note: This is model WTW6600SBT, you never said what yours was.