20 Most Recent Whirlpool Cabrio WTW6600SBT Top Load Washer - Page 9 Questions & Answers

You have something stuck between the the outer and inter tubs

Whirlpool washer # WTW4800BQ If I choice not to use the fabric softener dispenser what is the best way to add a liquid softener? Can I use the Downey Ball?

This could be alot of things but sounds like the squelch might be turned off. turn the unit off hold th squelch button and turn the unit back on. you should hear a high beep when the squelch comes on.

You should have a LF code if so, then the water valve is your problem.

If its under the agitator, simply unscrew the top of the agitator, pull up the agitator and remove the Necklave. If its under the tub itself, you need to access it from underneath, which means you will need to take off the entire outside cover, starting with the top. Once you have removed the entire cover, then you will need to remove each piece that is blocking you from getting to the Necklave. This process is better done by an appliance repair person.

Before going inside the machine, first verify that it is perfectly leveled and firmly set on the floor, with all four legs on ground.

Ok this error means Long fill as you know, Basically if the machine has not filled after 10 minutes then it goes into this error condition. First thing to do is make sure the taps are turned on, they likely are so unplug the machine, shut the taps off then unhook the water lines at the rear of the machine, next look inside the vlave (where the fill pipes hook up) and check the filter screens, these are likely clogged.