Singer 3116 Simple - Page 6 - Answered Questions & Fixed issues
Singer 629 metal part at bottom won't spin around
Most likely one or more of the gears that drive the hook have broken.
If you are comfortable with taking the bottom cover off the machine you should be able to see the damaged parts. It is not a DIY repair because there is a timing gauge that is used in the repair and the timing needs to be exact or the machine will not make a stitch. Check with a sewing machine repair person you trust to look at it and give you an estimate for repair.
9/14/2013 6:51:55 PM •
Singer 3116...
•
Answered
on Sep 14, 2013
•
47 views
Pattern calls for 3/16 seam allowance. What is
Well, the normal seam allowance is 5/8ths. Always has been except on crafts and doll clothes. 3/16ths is 1/3 of the normal 5/8ths so I would think, now wider than the width of your sewing foot.
9/1/2013 6:40:50 AM •
Singer 3116...
•
Answered
on Sep 01, 2013
•
189 views
15 different types of thread - polyester, rayon,
I would suggest having the sewing machine checked to see if there is a adjustment needed in the timing. and also to see if the tension dial has any problems.it could be the needle and thread are not compatable with the fabricis the needle in the needle holder correctly?are there any burrs in the needle plate or in the bobbin area?
8/10/2013 12:56:58 AM •
Singer 3116...
•
Answered
on Aug 10, 2013
•
105 views
My son broke the spool pin and I can not find a
You didn't throw away the piece did you? You can get a fiberglass repair kit at the automotive store, mix a little up and use it as glue. You may have to tape it together for a little while but then it will be like new.
7/31/2013 9:10:32 PM •
Singer 3116...
•
Answered
on Jul 31, 2013
•
232 views
Spool Pin Broke off
Ask you local Singer dealer, be armed with the model number when you call.
Freestanding spool holders can be bought (or made.)
7/31/2013 9:08:57 PM •
Singer 3116...
•
Answered
on Jul 31, 2013
•
1,484 views
Bobbin thread will not stitch.
Have you had the machine serviced since you purchased it? This is something that should be done at least once a year.
Take the machine to a certified Singer dealer and explain what is happening. There may or may not be something that needs to be adjusted.
Your warranty is still in effect, but is now limited. Attempting to repair it yourself or having someone who is not a Singer dealer repair it will invalidate the remaining warranty.
7/24/2013 1:23:14 PM •
Singer 3116...
•
Answered
on Jul 24, 2013
•
347 views
Reverse lever
check and adjust thread tension on needle and bobbin. It requires changing for different thread thickness.
5/11/2013 7:39:37 AM •
Singer 3116...
•
Answered
on May 11, 2013
•
29 views
Somethings wrong with the bobbin, it knots up on the back of material
try these suggestionsTry these suggestions
1. Change the needle--use a needle that's for the fabric being sewed
2. Rethread the machine--top --make sure to use every thread guide
3. try a different bobbin--make sure bobbin is inserted correctly into the bobbin case, & make sure the bobbin is turned the correct way in the bobbin case
4. make sure the thread has not come off the thread take up lever
5. Clean under the needle plate & in the bobbin area for lint or threads
4/15/2013 8:23:50 PM •
Singer 3116...
•
Answered
on Apr 15, 2013
•
127 views
Not finding what you are looking for?