20 Most Recent Toshiba Satellite A135-S4527 Notebook - Page 7 Questions & Answers

Go here:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1845345&rpn=PSL48U&modelFilter=L45-S7423&selCategory=2756709&selFamily=1073768663

All of the drivers for that laptop are listed for download.

If you can't find an XP driver for the wireless adapter there, you will need to use a program like Everest to figure out what brand/model the wireless adapter is and use that to find an xp driver for it, if one exists.

You can download Everest here:

http://majorgeeks.com/download4181.html

I hope this helps! If this did help you, please give a thumbs up!

Thank you for choosing FixYa!

This site should solve your issues: http://www.driveragent.com/

Go to http://support.toshiba.com and then choose Laptop / Satellite / and your model and then all drivers will be displayed when you choose your operating system. It think this is an older model, if that is the case and no drivers available, then you may need to google it or under Control Panel under System and Security, choose Find and fix problems. In Windows 7, a lot of times, this tool can find the driver for you from Toshiba's site. 

You can download thewireless and device drivers for your model laptop from the Toshiba WEB site from theirdownload page. Make sure you enter the model of your laptop so you can get thecorrect drivers. Please click on this link: - http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp http://blitware.com/adpages/driverfetch/manufacturer/?manufacturer=Toshiba&gclid=CMOVxNCBx6ACFSgnawodoHNGbA

Hi. You may try to find all the drivers for your machine in this site. By default, this site opens under Support Bulletins. Just click on Downloads
Hope this helps.

just download....rescue trinity software so that you delete a bios password that is only things to do, there is no solution to bypass the bios password except you know the password..

Windows XP:

By default, all laptops either go on standby or turn off to save precious battery, but you can override these rules from the Power Options (XP) in your control panel (Start > Control Panel > Performance and Maintenance > Power Options) and click on Advanced Tab and override the settings according to your preference.

I prefer "Do nothing" while closing the lid. Although this is real simple, few of us might not know it. I

Windows Vista/7:

How to Stop Laptop/Notebook Goes To Sleep or Hibernation when Closing Lid in Windows Vista

1. Log on to your computer as an administrator. Click on Start, go to Control Panel -> System and Maintenance -> Power Options.
2. Click on Change plan settings for the currently active plan.
3. Click on Change advanced power settings link.
4. In the "Power Options" dialog box's "Advanced Settings" tab for the active power plan, expand Power buttons and lid.
5. Expand Lid close action.
6. Change the value to Do nothing for "Lid close action" by selecting a new option from drop down menu for both On battery and Plugged in. Based on own preference, it's possible to set other action from the menu too. Available for selection is Do nothing, Sleep, Hibernate and Shutdown.
   
7. Click OK button.

hey
wat u tell is could be hardware problem in ur touch sensivity BUT still

1st go to control panel check the mouse setting and reset ur setting if everything is perfect thn change it like change the settings and then restore ur setting this is try to make it activate ur setting of ur touchpad

ALSO do try to go to device manager from control panel then select the setting of MICE & Other Pointing devices and selct the touchpad select it then right click on it and go for update driver option and update ur drivers from internet let it search it automatically and restart ur system .

if still not solved get it checked by engineer as it would be hardware prob may be some wire would be loose from inside ur laptop

DYI Procedure : (Be careful cause some parts are to sensitive)

1. Dismantle all screw attached on the back panel

2. If you can locate the CMOS battery,just remove it for a several seconds and put it back again.

check this illustration link below :

http://www.laptopparts101.com/wp-content/uploads/2008/12/removable-cmos-battery-560x420.jpg

http://www.laptopparts101.com/wp-content/uploads/2008/12/coin-cmos-battery-560x420.jpg

http://www.hermann-uwe.de/files/images/laptop_cmos_battery.preview.jpg

3. assemble it and now check the bios with out password....


Hope this solution helps...

There is a screw holding it in on the bottom remove the screw ans then it just slides out

I had the same problem on a toshiba satellite u400.
Usb over current on port ... blabla..
Please press F1 to resume or F12 to install.
F1 just ended up in a screen asking to press F2 or F12 which did nothing.
F12 did nothing.

Rebooting the pc ended in a black screen with a flickering HD symbol.

To be able to boot again on the BIOS I had to remove the battery and disconnect the plug.
Once It restarted booting on the error USB over current.

Si I took a USB mouse and tried to boot with the mouse plugged in on port , then another ... at the third port the PC booted normally with no error :)

Don't have any idea why it became faulty but it's now solved for me.

Most Toshibas drivers are specifically written for vista or windows 7. Ive noticed many problems when downgrading some machines especially with the drivers. If you haven't already, go to toshiba's website to search the drivers. If not, a 10$ program named "driver genius" works fairly well. I use it on a lot of computers that are having driver issues. Especially from a downgrade. Hope this helps!

Just type "Toshiba" when password prompt.
Or
Press left shift key is down during booting.
Good Luck

Hello,

what's the problem with "acpi atk0100 1010100 xp"?

Can you please rephrase your question because I don't understand what you mean by "acpi atk0100 1010100 xp"

I look forward to your reply,

Bye for now.

There might be a restore partition. This is only possible if your laptop has such a partition. Otherwise, you will need to get the recovery Disc.
If you have such a partition, you should see a reference to it when booting up - F12 or something. If you have it, then go through it.

probably a virus.
if you can go to http://www.malwarebytes.org/ and download and run malwarebytes it should fix your problem.

Yes. The best is to use a can of compressed air to blow any dust or hair out the keyboard and from around the fan exhaust. Any deeper cleaning would need to be done by a professional.

Welcome to Fixya.

It seems like you are experiencing a "No power/no post" issue on your laptop, here are my recommendations :

• Disconnect everything attached to your laptop (USB cables, etc)
• Disconnect the ac adapter
• Carefully remove the laptop's battery
• Press and hold down on the power button for at least 10 seconds
• Connect the ac adapter to laptop without the battery and turn it on
• If this works, return the battery to the laptop and try it again with the ac adapter

If none of the above procedure works, then the laptop needs to be serviced. I've included Toshiba's support contacts below for your further reference :

Toshiba Support

Hope this helps and Thanks for using Fixya.

You can try KeyDisk for Toshiba.

http://msbin.com/reset-toshiba-bios-password/

Did you re-installed windows?
There are two reasons for this problem.
1. speakers doesnt work
2. you dont have the driver for sound in you pc.
;) i can help you with this but ill need more info of your pc ;)