20 Most Recent EliteGroup P4M800-M7 Motherboard - Page 2 Questions & Answers

Hello,Laptops could and can be all compatible. However when looking into gaming requirments you should reference the games minimum requirements and start there.Here are the requirements for Star Craft II :System requirements

• 2.6 GHz processor or equivalent
• 1 GB RAM for XP, 1.5 GB for Vista and 7;2 GB RAM for Mac OS X
• 128 MB video card (minimum, Mac/Windows)512 MB video card (recommended, Mac/Windows)
• DirectX version 9.0c or better
• 12 GB hard disk space
• Internet connection[8]

Hello,You need to download the manual here:http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=91 it will included all pin details.

First make sure you haven't installed too much memory. The computer uses DDR 2 memory but what is the maximum amount it can use. If it can only support 2mb and you have 4 installed the computer will read that as an error during boot up. Second, disconnect the Keyboard and as the computer is booting access the BIOS. disable the stop on all errors setting so it can get past not sensing the keyboard and see if that boots. If the computer boots after that the problem is a fault in your keyboard like a stuck key which will give you the constant beep. If you see the spalsh or BIOS screens then the problem is not the Video Card. If you don't get those screens double check and make sure the Video card is properly installed with nothing installed in a slot directly below it as this sometimes causes conflicts.

Hello,You can find all the drivers for your motherboard here:http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&DetailID=548&DetailName=Feature&MenuID=24&LanID=0

Hello,Please check the BIOS to see if the SATA ports are enabled. Older boards will disable the sata ports in the BIOS by default. To enter the BIOS, hit the DEl key as soon as you boot the PC.If ports are enabled, then you probably have to format the drive.Heres how:1. Right-click My Computer and select Manage. 2. Under Storage, click Disk Management on the left pane.STEP 3 - Format the device / drive / MP3 player 1. Right-click on the 1 TB drive you want to format then select Format.Windows will not recognize the drives file system and will mount it with a drive letter. ex; E:

click start control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you computer came with a motherboard disk the drivers could be on it

or you might have to download or update them using the slim drivers program

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

SlimDrivers automatically updates PC drivers with real-time scanning and cloud technology. The first cloud-based utility for updating and maintaining drivers, SlimDrivers provides instant optimization of the interaction between a computer and its system components and periperhals, such as printers, graphic and sound cards, motherboards, USB ports, game controllers and other devices and hardware.

SlimDrivers scans a PC, identifies the correct drivers needed, and retrieves them from the cloud, automatically installing the most current, precise drivers for each individual PC. SlimDrivers features a one-click, start scan button on its product homepage, which begins the process automatically to scan a PC and identify out-of-date or broken drivers. Then, seamlessly, SlimDrivers creates a personalized driver profile of that PC, and accesses the online cloud database for the most up-to-date, customized driver software. http://majorgeeks.com/download.php?det=6171 License: Freeware Requires: Win7/Vista/XP Driver Sweeper keeps your PC stable and fast with advanced driver removal that ensures the maximal performance of your PC. Driver Sweeper avoids driver conflicts and system failures by removing all previous driver entries. Combined with additional features such as backups and a desktop icon manager, Driver Sweeper offers a complete solution to all your driver needs. http://download.cnet.com/intelv13-zip/3000-2112_4-195759.html http://download.cnet.com/intel-pro-network-zip/3000-2112_4-165499.html these 2 driver packagea are from cnet http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for (be precise) exclude - / you might have to search/try a few times to get it right or what you want also the download software finder under that there will be a list place a tick in the box of any one you want/need all software windows software mac software mobile and web apps

http://majorgeeks.com/downloads35.html

also this link will provide you with many freeware and share drivers

hope this helps you

Hi fleetpio,


1. How to detect sata HD?- I am assuming that you have fixed the hardware part. During POST (Power On Self Test) press delete key inyour keyboard.




2. After pressing delete, a menu like the image above will appear. use arrow key to navigate, enter to select, +/- to modify values, Esc to exit current menu and F10 to save settings. proceed to Features Setup and press enter.




3. Another menu will appear like the image shown above, on the Onboard SATA-IDE from IDE change it to SATA-IDE.


4. Press F10, Saves the current configuration and exit setup.


5. To verify if the SATA hard drive has been detected, look on your POST if the HD appears. If the full screen logo appears repeat Step1 proceed to Standard CMOS Setup, check if youre HD appears.



Hopefully this information helps.


Thank you for using FixYa.

http://reviews.cnet.com/motherboards/elitegroup-p4m800-m7-v3/4507-3049_7-31919152.html
http://www.brothersoft.com/downloads/computer-manuals.html you will have to type in the motherboard in the top search tab

or

http://help-site.com/c.m/

this site will tell you how to use something

hope this helps

http://www.9manuals.com/index.html

download after you pay

You can download the manual from
http://www.biostar.com.tw/upload/Manual/P4M80-M7_0227C_B.exe

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers if you can see your usb drive but its not working ports(com&lpt)right click update driver if this fails to fix the problem click start control panel administrive tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start or you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive if this fails to fix the problemcheck the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts also scroll to disk drives if you can see your drive + to expand right click you should see options update driver disable uninstall scan for hardware changes select properties you should see options in the general tab to troubleshoot policies volumes driver and details under the driver tab you will have the options to check the driver details update driver rollback driver or uninstall hope this helps

this motherboard supports the following
LGA775 socket for Intel Pentium 4/ Celeron D/ Pentium D processor
FSB 800/533 MHz
so anything above that might not work or just simply be a waste of money

the e5700 will fit as it's the same socket configuration as the motherboard but here's the rub, the 5700 is only compatible with motherboards that have intel chipsets and, according to the website, your motherboard doesn't have an intel cjipset, but a via chipset.

so the simple answer is no!

http://ark.intel.com/Product.aspx?id=42801
http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?detailid=548&CategoryID=1&DetailName=Specification&MenuID=52&LanID=0

In order to test the Cmos battery you neen a DC Voltmeter. If you have one, a good battery will read 3.0 V +/- 0.2 V

Usually all you have to do is look at your clock on your Monitor sceen. If it's losing time, you need to replace the battery. If the battery is really weak, when you Double Click on your clock and open the Display Time Properties box, you may see that the date and even the year are wrong also.

You can download Microsoft office 2007 or 2010 at These programs are NOT free. I recommend that you download the latest version (2010).
If you need Office 2003, I suggest you try searching on E-Bay.
If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please rate my solution using FixYa's "Solution Helpful" rating scale.
Best regards,
Yavacotech

Did you pull the CPU out and see if it will power up with out it you should still see the Bios. That would tell you if it was the chip pull one stick of ram out at a time and check by removing piece one at a time.Make sure you turn off the computers power supply every time you touch something inside the tower but leave the cord plugged in so the static goes to ground.

1.Yeah - first thing I'd suggest for you is boot in safe mode, run chkdsk /r
then sfc /scannow and see if that helps. If not, maybe system restore and go
back a couple of weeks.
2.Right click My Computer.
Choose Properties.
Choose Startup and Recovery.
Untick the box marked Automatically Reboot.

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your motherboard to your hard drive make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

hope this helps

if your computer came with a disk the sound drivers could be on it control panel sounds and audio,volume,advanced,speakers select appropriate speakers or audio you will find 3 drop down lists make the necessary adjustments there or control panel,administrive tools,computer management,device manager,sound video and game controllers could be a yellow question mark? right click to re-install drivers hope this helps

Sorry, no beeps = dead motherboard. You will have to replace it.

Did you check your sound driver? if you installed the right one?
Try to check your system harware if your driver is compatible with your chip