20 Most Recent Kingston (SDCZ2-512-A10-KT) (SDCZ2512A10KT) .512 GB Hard Drive - Page 2 Questions & Answers

click start control panel administrive tools ,computer management ,device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers or if you can see your usb drive but its not working ports(com&lpt)right click update driver check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts also scroll to disk drives if you can see your drive + to expand right click you should see options to update driver,disable,uninstall scan for hardware changes. or select properties you should see options in the general tab to troubleshoot,policies,volumes,driver and details under the driver tab you will have the options to check the driver details,update driver,rollback driver or uninstall hope this helps don

please check whether it contains any viruses in it.If yes remove them after that it should work.still not working means you have apply for warranty

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts also click start control panel administrive tools ,computer management ,device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers or if you can see your usb drive but its not working ports(com&lpt)right click update driver or scroll to disk drives if you can see your drive + to expand right click you should see options to update driver,disable,uninstall scan for hardware changes. or select properties you should see options in the general tab to troubleshoot,policies,volumes,driver and details under the driver tab you will have the options to check the driver details,update driver,rollback driver or uninstall don

this can not repaired, buy new pen drive

It's in Write Protected mode because the memory chip inside is dying. Try to copy the files and after that junk it.

its not jumber ,its a looks like a switch..
First try to see is there any lock in your pen drive and see if its not locking it, you will see a switch which locks the pen drive at one side and unlocks it when you slide that switch to other side ,some drives comes with that option to protect it ..but if it is not

Use the Registry Hack to Disable Writing to USB Drives
Here is the link .just download the zip folder and after opening the folder you will find a file just double click on it..

http://www.howtogeek.com/wp-content/uploads/DisableUSBWrite.zip
----------------------------------------------------------------------------------------------
Low feed backs hurt my ratings and I tried my level best to resolve the issue. so show your appreciation by rating it.
Thanks for using fixya support..You have a wonderful day

click start control panel administrive tools ,computer management ,device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers or if you can see your usb but its not working ports(com&lpt)right click update driver click start click on my computer you should see your pen drive right click then select format another way is to control panel administrive tools,computer management disk management right click on your drive select format hope this helps

hi
you need to reinstall it
in other usb slot

control panel admistrive tools,computer management,device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers or if you can see your usb but its not working ports(com&lpt)right click update driver or scroll to disk drives if you can see your drive + to expand right click you should see options to update driver,disable,uninstall scan for hardware changes. or select properties you should see options in the general tab to troubleshoot,policies,volumes,driver and details under the driver tab you will have the options to check the driver details,update driver,rollback driver or uninstall hope this helps

Your pc already affected by virus ,you will need another pc to put the pen drive.then you will format the usb drive.Actually an autorun programe is running in your pc you can manuallly remove the virus .follow the instruction.
http://amiworks.co.in/talk/how-to-remove-new-folderexe-or-regsvrexr-or-autoruninf-virus/


Or you can another do it another way.

You should better to install quick hill and install for scan your HDD .

Here is the link =http://www.quickheal.co.in/downloads.asp

if your problem solve dont forgate to vote me.

control panel admistrive tools,computer management,device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers or ports(com&lpt)right click update driver hope this helps

your pc & kingston flash driver already affected by virus ,you cannot maintain the folder options because autorun.exe is runnning, you should go to another pc ,where that pc switch off the autorun from >run>gpedit.msc> administrative templates>system>d click on turn off autoplay>ennable >d arrow>select >select all drivers>ok .go tools>folder options>view>check on all hidden files> check off hide extention........ & hide protected ........



Then after use your affected kinkstone flash driver .Now you can see the many hidden file ,drag it and delete it or format the flash driver but your main pc should format and install the os again.

hello

due to the fact that this memory card is no longer available, Kingston does not have drivers fo this card . As a matter of fact SD cards normally do come with drivers , as they are conformed in a way that operating systems recognise them once you plug them into the SD slot

i hope this inofrmation helps you make a decsion

some background on this particular SD memory card you have

SDCZ2-512-A10-KT (Discontinued) Description: 512MB USB 2.0 DataTraveler I write up to 3MBps Discontinued Additional Info: DataTraveler I USB 2.0 Flash Drive Write up to 1.5MBps Read up to 6MBps Mfgr's System P/N's: SDCZ2-512-A10 (Kingston) Form Factor: USB Flash Memory Warranty: 5 Yrs†


here are some solutions .


When the problem occurs is a clue as to the cause.

For example, your response to a memory error message depends on whether:

1. You have just bought a new computer.
2. You have just installed new memory.
3. You have just installed new software or a new operating system.
4. You have just installed or removed hardware.
5. Your computer has been running fine and you've made no other recent changes.

UNEXPECTED PROBLEMS

If your system has been running fine, but suddenly starts to produce memory errors, and crash or lock up frequently, the chance of a hardware failure is more likely, since configuration and installation problems show up as soon as the computer turns on. Sometimes you can get memory problems if your computer is overheating, if you are having a problem with your power supply, or if corrosion has developed between the memory module and the socket, weakening the connection.

HANDLING SPECIFIC PROBLEMS

Here is a list of the most common ways the computer informs you of a memory problem.

1. The computer won't boot, merely beeps.
   
   
2. Computer boots but doesn't recognize all the installed memory.
   
   
3. The computer boots but the screen is blank.
   
   
4. The computer reports a memory error.
   1. Memory mismatch error
   2. Memory parity interrupt at xxxxx
   3. Memory address error at xxxxx
   4. Memory failure at xxxxx, read xxxxx, expecting xxxxx
   5. Memory verify error at xxxxx
   
   
   
5. The computer has other problems caused by memory.
   1. The computer intermittently reports errors, crashes frequently, or spontaneously reboots.
   2. Registry Errors
   3. General-protection faults, page faults, and exception errors
   
   

when you remove the flash drive you need to do an eject and wait until the system tells you that it is safe to remove it. Pulling the flash drive off the usb port without doing this can cause data corruption thus the errors you are encountering.
One solution is to empty all of the contents of your flash drive into a hard drive, format the flash drive, and then check its size. You should be able to use it normally.
Hopefully you did not get a "fake" Kingston 4GB flash drive that were being sold on Ebay for really low prices.
Good luck.

Throw it away, and buy a new one, since the current one is unusable.

it is trying to reformat the memory card... try recovering the data from the memory card through a computer...Use a memory card reader for the computer to read the data in the card...

if computer is not able to read the data, try recovering the datas using any recovery software...

recuva is one of the free recovery software, u can click here to download it...

Go to this site www.antispyware.com
and download this software.

thanks

All you need to do is to format the Pen Drive.
Open My computer.
Right Click on Pen drive.
Then click on Format. You will get different options like quick format or such.
Select the option that says complete format.
Once you format the drive you will be able to use it.

Thanks
Jimmy