20 Most Recent
HP LaserJet 1320 Printer - Page 2 Questions & Answers
I have an HP Laser Jet 1320. The error light with
Its indicates attention..1. door open 2. cartridge missed 3. no paper in tray 4. paper jam.
open the door there is notch which pushes the switch check notch broken? reinsert the cartridge check, load paper in tray check paper sensor flag strucked. Lift registration assm plate any paper partials under clean it..
I have HP1320 printer when i send the print
1-There is a plastic knob that press the laser unit's shutter at the front door check and make sure that it is OK .
2-there are some earthing wire, at left side that connect with toner,some time these wires pressed down and not connected with toner and the print comes blank.
Help!! Triangle with exclamation mark is flashing.
The blinking triangle indicates one of the following: Paper tray is empty, Door open, Paper jam, Misfeed from tray.
To fix it:
Verif that the print cartridge is present and that the print-cartridge door is closed correctly.
Verify that media is present in the input tray.
Clear any jams and perform paper-path functional checks.
To reset the printer after a jam, press the Go button.
You might need to clear the error manually, and press the Go button or close the top cover
Fails to print
Restart the printer after checking for a piece of paper that may be stuck. Also check your pick up rollers.
HP Laserjet 1320n Admin Password has been
joed_calcule
If you changed the password from the default one but forgot the one you set it too all you really can do at this point is set the printer back to the factory defaults. The menu options below will help you do this.
Advanced Printer Settings
Settings tab
Resets = Change all the printer settings back to the factory default settings.
Let me know if you have any more problems or questions
Issken
My printer hp-1320 Do not allow more than one paper problem
if its possible install the printer on another PC. if it prints god without problem than problem on your PC, follow this:
1. delete the device from "start-> control panel-> devices and printers (win7) or printers and fax (win xp) choice hp laserjet 1320 right click -> remove device. and delete driver software from control panel - > software " Than reinstall the software and turn on printer
2. try the new and the latest versions of drivers. you can search it in Internet pay attention to date of software
3. replace USB cable of printer sometimes it acts to work of printer, use original cable but no so long cable (1-1,5 metr)
4. if problem unsolved than the work to engineers,
recently we solved same problem on hp 2015, you must open covers of printer and access main board - formatter (where USB port exists), remove all wires and reinstall properly, if problem unsolved the formatter (look at the images) must be heated with special heating device. But its work of masters, don't try heat it if you are not specialist.
Not finding what you are looking for?