Element Electronics HD LCD TV ELDFT404-B - Answered Questions & Fixed issues
Eldft406 HD Digital LCD TV.Just got it and the sound goes in and out.
I have this same one and it shuts itself off at random, one time after only being on for 40 minutes. It started within 2 days of it being set up and it was maybe used for 6 hours total when it first shut off. The remote hardly works too. Other people have the same problems with this TV, read the reviews of it on Target\'s site. I got mine at Target so I have 90 days to return it and I\'m waiting until around the beginning of Feb. when HDTVs go on sale again. I suggest you just return it,. You can\'t even find it on the manufacturer\'s website.
1/5/2013 2:22:41 AM •
Element...
•
Answered
on Jan 05, 2013
•
477 views
I tried to register my new Element Electonics 40" Model - ELDFT406. Says model # doesn't exist ? Also having trouble getting the tint setting.
so you shouldn\'t bother too much with it. I have the same model and it shuts itself off whenever it chooses to. I\'ve only had it since the 23rd of November, and it shut itself off after 2 days and maybe being on only 6 hours in those two days. It shut off the other day after 40 minutes. Read the reviews on Target\'s site, most people have issues. On Facebook, the manufacturer said they would be adding this model to their site within a week, and that was around the 26th of November that they said that and it\'s still not on their site yet. I got mine at Target and I have 90 days to return it, so I\'m going to wait until TVs go on sale around the beginning of Feb and return it.
12/4/2012 6:28:50 PM •
Element...
•
Answered
on Dec 04, 2012
•
350 views
The tv is not good color
possible bad joints on top of screen happen sometimes if the connections have been rushed whilst being manufactured
11/25/2012 6:49:10 PM •
Element...
•
Answered
on Nov 25, 2012
•
117 views
Element ELDFT406 shuts off by itself every 10-60 minutes
Ok, I am having the same issue. I just bought my tv - same model at the Target Black Friday sale. Can I ask, did yours make a low humming noise before you changed it out. I still am within my 30 day exchange policy, so I am thinking it would be wiser just to exchange it... but my concern is, would I get one with the same problem (or worse) in exchange?
12/19/2021 6:09:03 PM •
Element...
•
Answered
on Dec 19, 2021
•
18,019 views
Can't connect to Netflix with my Element smart TV
Where your Smart TV already has an app in its app pages, start that app, log onto your Netflix account (which you need to pay for) and watch away.
If your TV does not have a Netflix app, give Player a try at
http://www.Playora.com - this is an app that runs on a PC and lets you open content on the screen of the PC and toss it to a lot of different Smart TVs (Samsung, Panasonic, LG, Sony, JVC, etc.). Ithing, It will be helpful for you.
5/13/2020 11:11:46 AM •
Element...
•
Answered
on May 13, 2020
•
235 views
My Element Electronics 46" LCD tv model ELDFW464 has sound but no picture.
Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
1/21/2017 7:01:22 PM •
Element...
•
Answered
on Jan 21, 2017
•
345 views
My Element tv has no sound no picture, it comes on and half of the screen goes white for 4 seconds then the whole screen turns blank
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
11/4/2016 2:23:35 AM •
Element...
•
Answered
on Nov 04, 2016
•
148 views
ELEFW408 has no sound or picture. Can see screen with flashlight. I replaced the main power board and still the same
Fault at its main digital board.
Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
9/13/2016 3:37:50 AM •
Element...
•
Answered
on Sep 13, 2016
•
276 views
Not finding what you are looking for?