20 Most Recent Comfort Zone CZ1500WC Infra-Red Utility/Portable Heater - Page 2 Questions & Answers

It's probably some swolen electrolytic capacitors that need replacing. If you know of an electronic shop close by or buddy that can solder maybe you can remove the pcb and take it to them. Radio Shack may stock the caps.

It either has a short in the wiring or may need a new PCB

does it come on after a few hours? or the next day? all heater have safety fuses in them that sense the temperature near the heating element and will shut down the power to the element to prevent fire. however these things fail some times on the side of caution. It is possible the air flow is not enough or the fuze is faulty

There is probably a problem with the wiring. Either there is a short or a wire has become disconnected. You can probably open the heater up (carefully) and see what is wrong. If you aren't feeling comfortable with that, bring it in to a repair shop. Elisa Jed ' http://www.orlandoac.com/

yes show temp and come on and will not run

What is wrong with my Comfort furnace, If it will not turn of when i push the off butting ?And even after that i unplug it and turn it back on ,it still comes on and will not go of like it use to with the temp control !!

What is wrong with my Comfort Furnace heater if i have it turned off and it still keeps blowing ,Yet if i plug it back in it still comes on and i can turn it way down with it down on 55 and it will not shut of like it use to?

NEED TO FIND OUT THE COMPLAINT DEPARTMENT, HEATER MELTED OUTLET AND PLUG NEED TO KNOW WHOOM TO CONTACT

its show flashing AO5 code and than shut off

The control board needs to be repaired. You can get in contact with me at [email protected].