20 Most Recent Jensen VM9510 Car DVD Player - Page 7 Questions & Answers

Hello,

there are two things that could cause this; 1.) its either the screen inverter is bad or 2.) the screen itself is bad.

One of these two needs to be replaced for the problem to be solved.

So fixing the problem involves replacing the part of the player that is bad which is the screen or screen inverter.

Good luck.

maybe it is format problem. well, it seems that a video to iPod converter can meet your needs. i often convert videos to my ipod, and it have full of my favorite movies. so i recommend this for you, then
your problem can be solved. its name is Daniusoft Video to iPod Converter.

the most powerful feature is: it can help u to convert videos to iPod MP4, MPEG-4, M4V format with high speed and excellent quality. in addition, it can also convert audio files
of WAV, WMA, MP2, AC3, RA, OGG, APE to iPod MP3, M4A, AAC. so you can enjoy videos and music on your iPod.

more information here: http://www.daniusoft.com/video-to-ipod.html#10210
hope this recommendation can give u a hand. good luck.

try audivox.com. audiovox owns jensen.

My colleagues doe's this the cable designated to connect to the break they put it on the chassis of the stereo but this is illegal on the Us

I Have the wiring harness and can get more of them. Email me @ [email protected] if you want one Jensen vm9510 harness

You have to connect the park wire of the Jensen to your hand brakes that gets a negative signal everytime you engage it or you can try to put in series the park wire to a switch and any ground. Then read your manual how many times you got to switch it on and off until the picture appears when your dvd is playing. Same thing if you connect it to your parking brakes you got to engage your parking brakes on for 1 or 2 secs then back off then back on again for 1 or 2 secs keep doing this varying the secs till you get a picture. That will be the sequence to turn off that blue screen and on the dvd to watch the movie. Read your manual very carefully it will tell you the same thing but you definitely have to hook up the brake wire or else you will never see the picture. Check the manual for the color of the brake wire or just find the longest wire on the harness and thats usually the brake wire.

Go to their website, and Use the Support, and ask them directly.

Go to the Jensen Website and call up their technicians they might sell you a radio harness for like $10- $20 Most retailers won sell you a harness for each radio has its own and no extra. Or you can try to find a broken similar Jensen radio and unplug its harness or go to Best Buy roadshop where they install radio's and they may have a spare jensen harness.

I have the same problem :( its always says bad DVD but its a new dvd i dont get it :( can someone help us?

1: Go into AM/FM mode
2: Hit "setup" on the remote control
3: Enter 543210 on the remote, listening for the beep for each number entered
4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen.
5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen
6. I am not responsible for whatever you do with this code!!!

legally, you don't.

Wiring Connections
1. TV TUNER
2. ANTENNA
3. POWER ANTENNA WIRE (Blue) – Connect to a motorized (power)
antenna and/or to a remote turn-on lead for an amplifier.
4. CONSTANT POWER WIRE (Yellow) – Connect the 12V PLUS constant
power wire to a live 12 volt wire in the vehicle. Before making a connection,
check that the wire you intend to connect it to is always live, even when the
car’s ignition is turned off. If a live wire is not found, route the wire to the
car’s fuse block and connect it to a live circuit there.
5. GROUND WIRE (Black) – Securely fasten the Ground wire to a grounded
metal part of the car’s chassis. If you cannot find an existing bolt or screw
to fasten it to, drill a hole in the metal and secure it with a screw. To ensure
a good ground, remove any paint or grease from areas where the wire will
contact the surface.
6. PARKING (Pink) – Connect to negative parking brake wire. This wire
MUST BE connected in accordance with federal, state and local laws. It is
the end-user’s responsibility to make sure this wire is connected properly.
7. ACC POWER WIRE (Red) – Connect to a +12 volt circuit that is only live
when the ignition is on. The best connection point is at the car’s fuse block
at the “RADIO” or “ACCESSORY” identified terminals.
8. LEFT FRONT SPEAKER (white, white/black)
9. RIGHT FRONT SPEAKER (gray, gray/black
10. LEFT REAR SPEAKER (green, green/black)
11. RIGHT REAR ( + ) SPEAKER (violet, violet/black)
12. FRONT AND REAR RCA OUTPUTS
13. CENTER RCA OUTPUT (Gray) – The center output must be connected to
an external amplifier for 3D or 6-CH mode.
14. SUBWOOFER RCA OUTPUT (Blue) – The subwoofer output is available
in all sound/audio modes.
15. DEDICATED DVD OUTPUT – Video output for rear screen and left/right
audio output for headphones.
16. AV1 INPUT
17. AV2 INPUT
18. VIDEO OUT (Yellow) - V. SEL output for rear screen.

Or you can go to link below for the manual page 4

http://www.voxxsupport.com/images/User%20Manuals%20-%20FAQ's/VM9510_DOC_OM.pdf

Good Luck and please rate 4 thumbs for the free answer

tske the parking brake wire connect it tothe ground wire and dat it

no u just take the pink wire and connect it to the ground wire bro its dat simple

no pin . it should be wired in just like the rca jacks. 543210 press enter. in the am/fm . select brake bypass and turn it on and exit.

no the code should work . unless jensen put a stop to the code in the newer modles.

543210. enter this code in the am/fm screen. now select brake override

I'll start off by saying what you already know: it's dangerous and illegal to have in-dash DVD playing while driving...

With that being said, is there a parking break wire connected to your stereo? If so, connect that wire directly to ground and it should work great.

use a split rca at walmart for $5