20 Most Recent
Husqvarna Viking 1 - Page 4 Questions & Answers
Viking Husqvarna #1 + - A bobbin was stuck on the
The black plastic ring must be put back on with it oriented correctly. It can be a bit tricky, but experiment different ways.
Another small part may have come off too. If you can't get it, a Viking tech can do it for you without much trouble.
Left needle not catching on the bottom
Are you using a twin needle (ie reference to "left" needle)?
If so, the needle you are using may be damaged. Could also be a needle/hook timing issue requiring professional service.
...
Dongle
I believe that the information that you have been given is correct. The VIP dongle is no longer available.
As for the second part of the question, do you have a damaged dongle or has it been lost completely? If it has been lost, there is no way to replace it without buying a new software package.
Password For Viking Designer SE
actuall she/he means is after you hold down the back and pivot foot button and turn on the machine, it will pop up with a dialog asking for a password..
I cant find the manual for this sewing machine
For an owner's manual, search the internet for:
Make + Model + the word "Manual"
As for a repair or service manual, those are difficult to find as they were issued only to service or repair personnel. However, you may be able to find one by searching the internet or perhaps finding one listed on an auction site. There are also internet groups dedicated to particular brand sewing machines, ie Yahoo Groups. That may be a good source for repair advice or manuals.
...
How Need to know how to thread the machine and how
They have many different models so threading and winding the bobbin can vary due to your model. I would recommend calling them at: 1-800-474-6437 and see if they can get you a photo copy of your original owners manual.
Manual
Hello,
i need a manual for my Husqvarna 215 sewing machine.
can you help me?
My model 210 is stuck in reverse. Can you help?
The only thing you can do to possible free the mechanism is to turn the lower dial back and forth a bit, from the position where it is in permanent reverse to the numbered area on the dial. Make sure the selector is not on the buttonhole position. That machine doesn't really have a history of that issue but anything is possible, especially if it has sat for awhile and not been used. If moisture was present where it was stored, it's possible the feed linkage is slightly rusted and simply stuck.
Drivers for h class 500e
when I turn my machine on it says to check usb cord there is a connection problem, I have reinstalled the program and it still will not connect
Not finding what you are looking for?
