20 Most Recent HP Photosmart C7250 All-In-One Thermal Printer - Page 3 Questions & Answers

Solamente encuetro la solucion en Ingles::


http://www.out-of-warranty.com/ink-system-failure-error-0xc18a-hp/ I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

An '0x ...' Error Message Displays on the Front Panel When Printing HP Photosmart C5380 All-in-One Printer - HP Customer Care (United States - English).

If you need more help come back.

Post / thumbs / testimonial are welcome!

Press and hold the '*' key on the key pad, then press the '#' key and release them both. Then enter '123' to enter maintenance mode. Press the right arrow (beside the OK button) until System Config. menu appeared on panel. Then press OK two times to clear the error condition, then cancel two or three times to return to the top menu. Then powered off and back on, printed a test page just fine, copied a document fine.I hope this will help

Replace print heads.. For draft or letter work you can adjust with this print heads, but photo prints you need good healthy conditioned print heads.. as per you info you did every thing rest only thing to replace..

Hello and Welcome!The error Oxc18a0206 is mostly occurred in HP printersTo solve the error code Oxc18a0206,Follow the given steps

• Reset the printer without turning off the printer, disconnect the USB cable from the rear of the printer
• Remove the cartridges from the printer
• Wait for the 'Insert Cartridges' message to display on the control panel
• Disconnect the power from the back of the printer
• Now wait 60 seconds
• Now reconnect the power If the product does not automatically turn on, press the Power button
• Reinsert the cartridges, and then close any open doors on the printer.
• If you receive a prompt to print a calibration page.Print it
• Reconnect the USB cable to the port of the printer & then try printing again

Error will automatically remove. Sir, If you find my solution helpful for you the your Rating as FIVE STARS will be esteemed.For further help, you can take my valuable,professional help by taking my ServiceThank you for using FixYa!

The error relates to ink system failure you might not be able to get that printer repaired, if it is under warranty the vendor should replace you with a new one if it is out of warranty dispose the printer and buy a new one rather than spending time and money trying to get that printer repaired.

If you changed the wirelss password and that has stopped the wireles printer from wrking, all you need to do is to get inside the printer configuration and change the password there as well
If you meant that you changed the router login password and that has stopped the printer from working, then you are mistaken.

Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, thenprint head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

the link below is the troubleshooting document for ink system failure.http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&lc=en&dlc=en&cc=us&product=3382185#N66

Visit the link below:
docs.google.com/viewer
and follow the instructions .

Be sure to remove the protective cover on the nozzle. Also clean the contacts on the PRINT CARRIAGE. Try to replace the ink, to isolate the problem.