Generac 2000 Watt iX2000 Portable Generator - Page 2 - Answered Questions & Fixed issues
What does “over speed” message mean?
its means there is a problem with the stepper motor which controls throttle opening and closing directed by the controller
4/25/2021 9:59:53 PM •
Generac...
•
Answered
on Apr 25, 2021
•
137 views
Generac XG10000E - wont crank. No sound at all. Battery is fine.
See following link
https://www.generac.com/service-support/product-support-lookup
Check fuse and connections between start switch, control board, and starter solenoid.
ENGINE CONTROLLER CIRCUIT BOARD
GENERAL:
The engine controller board is responsible for crank-
ing, startup, running and shutdown operations. The
board interconnects with other components of the DC
control system to turn them on and off at the proper
times. It is powered by fused 12 VDC power from the
3/26/2020 11:17:54 AM •
Generac...
•
Answered
on Mar 26, 2020
•
295 views
Error code 1518 on a generac generator
If you have a Generac Generator which fails to start during a power outage and gives an Error Code 1518 - RPM Sense Loss you can try and manually get the generator restarted very simply. ... The generator should wait 5 seconds and then try and auto-start up to 3 times.
https://www.justanswer.com/small-engine/bwmwi-working-generator-generac-protector-qs-38kw.html
3/25/2020 5:00:26 PM •
Generac...
•
Answered
on Mar 25, 2020
•
2,881 views
Not finding what you are looking for?