20 Most Recent
Kirby G6 Bagged Upright Vacuum - Page 7 Questions & Answers
I have recently baught a
Kirby does not have anything online. The only way i can think of isemailing them, or even better, mailing them a letter ask for a copy.Most of the time it will be a scaned one, not the real thing.
here is a ready available manual for a fee:
http://www.goodvac.com/Kirby_Gsix_manual_p/k-sup-mnl-260099.htm
and here is a spot where you can request one for free but will take time.
http://www.manualsnguides.com/search.php?cmarque=KIRBY&modele=G6
If you are in the US you can call Kirby customer service at 1-800-437-7170 and request for one
Kirby sentria
remove the cloth bag from the bottom it twists counter clockwise, un clip the bag from the top remove the head piece, turn the belt lifter clockwise and release the lever to remove the head, take off the head, in your attachments there should be a screen that covers the impeller that the belt rides on it goes on like the brush head, put your hose onto the bag port by turning clockwise. there it is it will not work without the screen cover. thanks Rene
Bearing screeching?
Hello,
Yes, it could be a motor bearing. Another possibility is the fan could be broken. Remove the bottom plate from vacuum. Spin the belt motor pulley slowly and view the fan. You may have a plastic fan
that has broken or something is keeping the fan from spinning. Here are links with illustrations to an online guide. (the links will say "belts" but it will show how to get to the fan). Click the one that best matches your vacuum.
Hope this helps.
http://www.info-vacuum-cleaner.com/hoover-vacuum-cleaners.php
Senteria power will not come on at all
Make sure the bag and the front nozzle are attached all the way. There is a safety switch on the bag and nozzle. If either one of these is not on all the way the machine will not come on.
There is a reset circuit near the cord inlet. Make sure that is not tripped as well. When you plug the machine in listen for a click. If you hear a click and no power then perhaps the circuit breaker is faulty or there is a short in the machine.
Kirby foam sprayer attachment wont work
Hello,
The trigger on the suds gun needs to be turned (to the left, I believe) to open up the sprayer. Also, make sure that the straw is firmly inserted into the hole in the bottom of the lid part. Hope this helps,
Marci
How do you make it blow you?
Hi!
You need to take the power nozzle off and attach the thing that looks like a little plastic cup with two hooks on it. This is the intake guard. Attach it to the front. Now remove the cloth bag and put the hose on the hole where the bag was. You'll have to line the arrow on the hose up with the notch on the Kirby and push the hose arm toward the Kirby until it pops on. If you need to, lube up the edges of the hole with a wee bit of vaseline or hand lotion. This makes the hose engage easier. Since you lost your manual, you may need belt change instructions as well. Here is a link to my online guide that will show you how....
http://reviews.ebay.com/CHANGING-THE-BEL...
Hope this helps...
Marci
Kirby Sentria doesn't pick up visible dirt
As far as picking up - I suspect that your belt is not properly installed. Watch the video manual
HERE. in the first halve of the video there is an instruction how to properly instal nozzle.
You have to turn the bag about 30-40 degrees countercloclwise so plastic protrusions on the tube top adater (ones that keep bag attached to the tube) will allign with cuts in bag cardbort so you can pull the bag off the adapter. If you will take a look at the new bag - you will see what I am talking about.
Not finding what you are looking for?