20 Most Recent
Canon PIXMA MX850 multifunction InkJet Printer - Page 4 Questions & Answers
Canon Pixma MX850 says it's out of paper when there is paper
The feed switch changes the paper feed from rear feed to tray feed (paper tray is under the output bin). If you have paper in the rear feed, the green light should be on top of the printer icon left of the feed switch. If you have paper in the tray, the light should be on the bottom of the printer icon.
Printer says there is no paper to receive fax.
I may be wrong but at a guess it may require the paper to be in a specific paper tray which may mean you haven't got any in the one it's asking for.
Check that you have paper in both the bottom and back/top paper trays and see if that helps.
My Canon mx850 says the print head is incorrect
It's highly likely that the printhead is damaged or has fallen out of alignment.
Unfortunately the Canon printheads can, when dying fry the printer they are installed in.
My advice would be to contact Canon support as soon as possible and request a warranty replacement of your printhead. In the mean time I would recommend removing the cartridges and printhead. Put the orange caps back on the cartridges (if you still have them) or some electrical tape to keep them from drying out while you wait for the replacement printhead to arrive.
It's also worth checking that at the back of the printhead carriage, there are all the little copper contacts in place... There's a lot of them but sometimes these can be bent or broken off from poor manufacturing or handling. If any of these is missing you should request a warranty replacement from Canon for the whole unit.
Hope this helps.
SAYS PRINTER IS JAMMED; YET NOTHING IS IN THERE.
Normally turning it off and back on resets the error code. However, lots of times they may be a small piece of a paper stuck causing the error code. Turn the printer off for about 10 minutes, see if that clears it and check one more time for some paper jam.
Canon Pixma MX870 won’t turn on
my suggestion : take your printer to an authorized service center, probably the printer has a defective electronic board, there is nothing you can do to fix it
How do I reset Canon TS9020 printer to get rid of system error 5b00
Check out the videos on resetting Canon printers. They all follow a theme.Looks like I forgot to include linkshttps://support.usa.canon.com/kb/index?page=content&id=ART170494#:~:text=Reset%20your%20printer%20settings&text=icon.,setting%20you%20want%20to%20reset.https://www.youtube.com/watch?v=oQqMJxYRT3s...
Not finding what you are looking for?