20 Most Recent Uniden D1484-4 DECT 4-Handset Cordless Phone - Page 6 Questions & Answers

Try contacting the manufacturer. You can look on Amazon or eBay too.

no the hand sets are registered in the base set for the first hand set they can be used as an intercom Read the user manual or down load one from the uniden web site It is a pdf version search --user manual for uniden dect 1635 WH phone

call uniden but it should be you have to run the base station cable through the nbn modem for it to work

Ringer is turned off.

press menu scroll to phone settings press menu scroll down to ring time press menu scroll to most minutes press menu press end see if that does the trick or search --user manual for uniden phone model sse45 phone and down load the pdf version

depends on the country In Australia , receipt is proof of purchase date and registering with the company is not necessary the registration that is necessary is each hand piece to the unit base station and the user book tells you how to do that

try this press menu scroll down until you see global set up press menu scroll down to vmwi press menu scroll to yes press menu then press end save this as it happens a lot with nbn systems

Check if the base power adapter is warm to the touch. If it's cold, then the base has no power. Test if distance between the handsets and the base is an issue by moving closer to the base. Check for any radio interference. Check if the handsets are registered. You may need to de-register them first. Try unplugging the base (power and phone line cord) then remove the batteries from each handset. Wait at least 15 minutes before restoring the power/batteries. If the base has a charging cradle, place one handset in that cradle and wait a few minutes. See if that handset works. Otherwise, try to register one of the handsets and see if it works. If the problem persists, then the base probably has a problem transmitting or receiving the signals from the handsets. Unless the system is under warranty (one year), you should replace the system. Otherwise, contact Uniden customer support. I hope this helps. Please add a comment with the model of the Uniden phone if you want directions for registering/de-registering the handsets. Cindy Wells

press talk button or press menu and settings and press answer on pickup -menu and end

You should be able to set the Uniden answering system to Off. There are exceptions. The answering system will automatically turn on if the Uniden system has Do Not Disturb or Silent mode enabled. To check for the DND mode, look for a DND button on the base. Press and hold the button to toggle the feature off. For the Silent mode, look for the # symbol (below 9) or a Silent button on the handset and press and hold the button. Then either turn off the answering system using the button on the base or go through the menu to turn it off. To use the menu system, make sure that the phone (all handsets) system is in standby mode. Press Menu and use the arrow keys to navigate to Ans. System (or Ans. Setup). Press Select and look through the menu for a line that has Ans On/Off. Press Select and set this to Off. Press Select to Save. Press End/Clear several times to exit the menu. I hope this helps. Please add a comment with the Uniden phone system model number for specifics on where to find the Do Not Disturb or Silent buttons and the Answering system setup. Cindy Wells

press menu scroll to settings press menu scroll to ring time press menu adjust to new number of rings press meny and then end

This is most likely the microphone, you need to inspect the area with the little holes for stuff stuck in there. The only other thing you can do is get another hand set

press menu scroll to settings move to ring time press menu move to increase ring time press menu then exit