20 Most Recent
Uniden D1484-4 DECT 4-Handset Cordless Phone - Page 4 Questions & Answers
Setting time & date for uniden home phone exs9500 serial # 94028608
The directions to set the date and time on the Uniden EXS9500 are shown in the manual starting on page 21. Press and hold the Clock button (the second button from the left below the answering system buttons) on the base until you hear a beep. Use the Skip/Repeat buttons (the two end buttons of the answering system buttons) to select the current day of the week. The LCD with show 0 through 6 and the voice prompt will list the day of the week. Press Clock when the correct day of the week is announced. Use the Skip/Repeat buttons to select the current hour (1-12). Press Clock to set the hour. Use the Skip/Repeat buttons to select the current minutes and press Clock to save the setting. Use the Skip/Repeat buttons to select AM/PM and press Clock to save the current time and exit the clock setting menu.
ManualsLib has the directions starting here:
https://www.manualslib.com/manual/334436/Uniden-Exs9500.html?page=21#manual .
I hope this helps.
Cindy Wells
Uniden cordless phone visual ringer keeps blinking
It is the indicator that you have a voice mail (answering service that comes with your phone provider. Contact them to tell you how to access it.
to access iprimus voice mail, dial your own number it will then ask for your PIN, if you have not set this up the default number is your area code ie. 02 Sydney 03 Melbourne etc. and the last 2 numbers of your phone number
Uniden dect 6.0 turn off CID recording
I find no way to disable the CID record feature.
If you wish to neither see nor record CID, contact your service provide and unsubscribe to the CID service.
A copy of the user manual is available at;
http://www.uniden.info/download/ompdf/DECT1580om.pdf
To delete all the recorded Caller ID numbers with the handset do the following;
When the phone is in standby, press ID (on the 4-way navigation function key), then press MENU/SELECT, then select Delete All. When the phone asks you to confirm, select Yes.
My Uniden M/N:D1788-2 is not working correctly. It will only ring once before machine picks up & red light continues flashing.
Likely the two ring answer is "toll saver" You'll need to retrieve new messages. Once all new messages have been reviewed, it should return to the programmed number of rings, see "ring time" in the manual.
ALL messages may be deleted as follows;
delete all messages With the phone in standby, press Delete; press Delete again to confirm.
If answering system messages have been retrieved, a continuing flashing indicator could be your voice mail service;
Voice Message Notification • If you subscribe to a voice mail service, your phone can notify you when you have a new message. This feature supports Frequency-Shift Keying (FSK) notification. Contact your voice mail provider for information. • When you have new messages, the display shows a message icon. After you listen to your messages, the message icon turns off. If it doesn't, you can reset it. With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes
A copy of the manual is available from Uniden;
A copy of your manual can be downloaded free of charge from;
http://www.uniden.info/download/ompdf/D1788om.pdf
Not finding what you are looking for?