Question about Pride Health & Beauty
...move all lights are flashes, it flashes 6 time and stop The code 6 failure code is the toggle throttle [engager] isn't in the neutral position when power is applied to ...
Question about Pride Mobility Products Health & Beauty
...move the throttle forward and reverse with power off. alsdo chech the connections in the tiller and remove the seat and battery cover and check the connections at the rear of the scooter sometimes ...
Question about Pride Health & Beauty
the lights work and power indicator shows there is power, but the scooter will not move forward or reverse when you press the lever, what do I check ? Any beeping sounds or flashing Led on the console
Question about Electric Mobility Health & Beauty
...move slowly forward or in reverse, but not both. Normally if the speed pot ( wig wag ) is not exactly in the central position, they can do this. It is possible for a scooter to have your problem, if ...
Question about Electric Mobility Health & Beauty
...power button until it bleeps. then move the joystick to the forward position and hold until it bleeps. Then move the joystick to the reverse position until it bleeps. turn off and then back on. Check ...
...power, the green light flashes and cannot move forward or reverse. There is plenty of power showing on the gauge. I need to know how many flashes you are getting of the green light. i.e. 4 flashes ...
Question about Pride Health & Beauty
...Move it from power to freewheel and then back to locked again. Sometimes will then work, other times won't. Just replaced the brake about 2 months ago, When it does work and I let go of throttle, ...
...move till a directional button is pressed. The only safety interlocks are seat not locked in forward position, and obstruction detectors. Remote switches are double throw momentary rockers, with ...
Question about Electric Mobility Health & Beauty
...forward or reverse will not drive brake engaged tthis is the same sound if you tried to move with the brake disengaged. This could be the break micro switch or the wiring in the motor brake loom. ...
44 questions posted
Usually answered in minutes!
140 Questions
116 Questions
82 Questions
61 Questions
58 Questions