Pride Value Line Revo Scooter 3 Wheel "status light freewheel" Questions

...status light flashes, but it will not run Kay the status light flashing indicates a problem. Count the nunber of flashes and your manual should tell you what the error code means. Also check the ...

...status. Put in freewheel and place firmly back in drive (located at the rear of the scooter). Go back in and make sure all of the snap connections are tight. Undo them and redo them, don't rely on a ...

status button flashes 5 times. Scooter is fully powered but will not move. Brake is off, lights work, etc. BEFORE U RING TRY THIS TAKE KEY OUT PUT FREE WHEEL LEVER IN FREE WHEEL THEN PUT IT IN DRIVE ...

...status light is flashing green 5 times would you know what is wrong hi, there is a fault finder at the back of the manual, 5 flashes means the drive motor is not coonected, check that the freewheel ...

...use alot. Went to use it the day and when I turn it on the status light started and then the scooter started beeping, the horn works, as does the lights and indicators.What is wrong? Jackij, ...

...Light does not function, the Battery/ Status indicator flashes rapidly. Count the number of flashes: 10 flashes An excessive voltage has been applied to the controller. This is usually caused by a ...

...status light flashes five times, pauses, then flashes again.The status light flashes five times, pauses, then flashes again. The scooter will not drive. This means that the scooter is in ...

...light use and has never been left outside or driven in the rain. It is kept in a nice clean environment. I don't have a schematic diagram for the scooter or else I might be able to troubleshoot much ...

...status light just flashes and it doesn't move ... The reset button isn't out and the wheels are engaged ... Reengage the wheels again then give it a slit push you should fell some resistance ...