1994 Jeep Grand Cherokee "need speed limits" Questions

...the 2nd and 4th gear doesn't shift ! i change the speed sensor and the electronic board but nothing change! please i need your help for this issue. code po720 is the output speed sensor ...

speed sensor. you will need a 1"socket to remove it. If replacing the sensor doesn't fix it you will need to bring it in and have it looked at. The speed sensors are pretty common failures on Chrysler

...need to be more specific .......Moving? sitting still? engine running? what speed? braking? cold? hot? faster you go it gets worse? better? does it follow the speed of the engine? MPH? doe sit change ...

...speed -Tires need to be rebalanced, tire weight missing -excessive tire wear from not rotating tire. -Play in tie rods. -CV joints are worn. -wear in upper or lower ball joints. -excessive wear in ...

...reverse i hear a hard grinding sound in the gearbox i and when i drive on high speed i hear the same I would check for metal in the transmission pan you may need a screen and filter or bands ...

...a way to test to see if the cluster on my 2004 jeep grand cherokee limited is bad. i was told i needed to replace it. my speedometer does not work. It could be a bad cluster, but first try the ...

...speed also has stalled in reverse. i have changed the ignition sensor and the crank sensor. and it still stalls. need help. need help with ideas to fix the stalling. already changed the senors in ...

...sensor and motor to a tps adjustment or sensor. Another problem I read was a kick down cable that needs adjustment. When I bought the Jeep, the previous owner said he rigged the kickdown cable to ...

...need to replace speed sensor. Is there anything else it could be? Hello there, One of the problems Jeeps do have is Transmissions. It is very typical of the sensors and solonoid packs to go bad, Also ...

...push at times for cool air. Blower motor appears to be fine also. Is there a sensor or other that needs replaced? 2002 Jeep Grand Cherokee Limited with dual climate control Check where the wires go ...