1990 Volkswagen Cabriolet "miles rotors last" Questions

...last 30K miles, I suggest you check and /or replace the the plugs and wires first. If your engine is equipped with a distributor, check and/or replace the distributor cap and rotor if it hasn't been ...

miles on 2002 3/4 tod hd , rotors are pitted bad That's to be expected and is completely normal. Rear brake shoes as fitted to drum brakes can typically last up to 60k miles with periodic adjustments,

miles and since that time, rotors only last about 8-10,000 miles before they need turning or have to be replaced. The mechanics don't seem to know why they don't last longer. Any ideas? (Otherwise the

...miles and replaced the rotors 4 different times within the past 2 1/2 years. does anybody have any idea what is causing this problem. make sure the caplipers are doing their job properly. if the ...

...be able to get 75k miles from a set of good pads and rotors should last even longer if you change pads before cutting into the rotor. No.....Always get new iron rotor..your car will work ...

...rotors twice (at 30,000 miles each time) and front rotors twice (at 30,000 miles each time). Why can't I just replace the pads as long as there is no wear on the rotors? Thank you, Leila Faber BMW ...

miles if not driven to hard or under extreme conditions, most rotors can be machined atleast once before having to be replaced with new ones unless your vehicle runs composite rotors they will have to

...sometimes it takes off sometimes it stumbles worst How many miles since the last tune up? Todays cars can go as much as 100K miles on a set of plugs but a Distributor cap and rotor may be the

...rotors and brakes are about to get replaced with the slotted ones to help solve the grinding death wobble affect. I now have an oil leak and my miles are getting up there.... ANY suggestions on what ...

...rotors are warping on my 2004 Mitsubishi Eclipse Spyder. Second set lasted about 6000 miles of highway driving and no heavy braking. main causes for rotor warpage are heat, mounting surface not ...