...spray head which pours the water onto the powder. remove the spray head, clean it and soak it in descaler. reassemble and do a brew. When finished check the surface of the coffee has 6 dimples where ...
...spray head by removing it and at the same time run the cleaning spring up through where the spray head screws to. before replacing spray head place your pot under and pour a pot of water through,to ...
Question about Franke Coffee Makers & Espresso Machines
...board adds time to account for the pulses. If you are encountering less water than before clean your spray head and spray head fitting. 75% of low volume service calls are from calcified spray
...spray head? Is the powder uniformly wet? If the answer is no to either of these, remove and clean the spray head. Use a descaling tablet or powder to soak the spray head and then use a small tool to ...
...spray head It says to turn the spray head a quarter turn counterclockwise with your fingertips. I have tried everything, even plier, and can't get it off. There is a little tab on the side of the ...
Question about Bunn Coffee Makers & Espresso Machines
spray head does'nt stay screwed in, i've lost 2? Do I need the female part that the spray head screws into? likely the threads are stripped in the shower head, get a new one from bunn, or an appliance
...spay needle head may also have debris in it. Lift your handle all the way up and look up under the to see the spray needle. Using a paper clip, clean each of the three openings out in the spray
Question about Bunn Coffee Makers & Espresso Machines
...spray head looks like. My new Bunn BTX-B brewed weak coffee also. I was wasting coffee to get it stronger. I decided to inspect the spray head. What The hey! What Spray Head? The coffee maker didn't ...
what is a spray head on Keurig? This is spray head.
Removing spray head Don't know how to remove. Need directions The spray head just unscrews counterclockwise.
97 questions posted
Usually answered in minutes!
11 Questions
6 Questions
1 Questions
46 Questions