HP Compaq nc2400 Notebook "glow plugs wont turn" Questions

...wont turn on Very often this is a situation where the battery is dead and the power cord is not working.  First off, check to make sure that the power cord is plugged securely in the laptop and ...

wont turn on? i have the charger pluggged into it but it wtill wont turn on. Unplug your power adapter, and takeout the battery. then old the power on button down fo 10 seconds to release any power in

...comes on by itself and the fan turns on. after 5 or 6 seconds it shuts off. also the power LED glows about half power. i disconnected the ram, hard drive, monitor, dvd player, and any other

...wont work... what can i do! I have 3 years of pictures on it... find me a efficient solution RIGHT NOW! :( First try Hard Reset: 1. unplug ac adapter then remove the battery. 2. press and hold the ...

...wont turn on. Any advice? I think that your battery is soooo flat it may be no good, take battery out, THEN connect the Correct adapter, and see if that works, if it does, then ya do need a new Batt, ...

...wont even come on when i press the start button, nothing? new battary and new charger,still nothing Hi Jerrel Castille, Request you to try following the below steps which might help: (1)Turn off the ...

...wont stay on for longer than a min it just cuts off if I fiddle with the power cord a little the screen changes from a dim glow to the normal way it is when I have it plugged in common problem,power ...

...glow green then it turn yellow an then i cuts off and it wont charge on do anything till i press the power button anyone here to help me? If your battery will not charge, you need to run a test on ...

...wont glow no nothing what can i do does the short circuit in my situation could couse really big problems that can i do please help me i will be very thankful Sounds like you might have damaged ...

...plugs in if any lights come on to indicate it has power or is charging the battery. The power receptacle in the laptop (where you plug in the AC adapter cord) might be damaged. In order to diagnose ...