wont start unless lid is put down is because there is a lid switch that is called a safety switch, you might have to bend down lid some or this: Ok, first check under the lid, there is a peg that goes
Question about Whirlpool Cabrio Washing Machines
...lid switch and now it wont lock or check that it is closed. if it is new then call whirlpool for service and they will set up a call to have it repaired for free. just be nice and all should be done ...
...lid wont unlock Here is a direct link to the User's Manual for your machine: http://www.managemylife.com/mmh/owner_manuals/7556/WHIRLPOOL-Residential-Washers-L0610182?brand_name_search=WTW6600SB ...
...lid wont open Some washer and dryers will clear the codes by unplugging the machine from the wall.... Leave it unplugged for 30 secs... then plug it back in..... may clear code..... and may unlock ...
Question about Whirlpool Cabrio Washing Machines
...wont spin or finish cycle, gave ld code, nothing stuck in drain pipe ld is for long drain,first did you pull the drain pump to make sure something wasn't stuck in it stopping it from turning or ...
...wont spin...washer is only 4 months old!! Solved the unbalanced problem - open the top of the machine (press in with a flat putty knife about 3" in on the front on each side while lifting up as there ...
...Elite wont turn on unless I open and close the lid a couple times. Now it wont turn on at all no matter how many times I open/close the lid. Please help. Tnx Jim sounds like your lid switch is ...
Question about Washing Machines
lid several times and it wont start have tried all cycles (7). have tried to rinse cycles and it still wont start. we cant find the lid switch and or sensor to check it out. where is the lid switch or
...to the spin cycle i think the lid switch is good cause if you open the lid the washer will stop and wont start again till you close the lid Still replace the lid switch. Most have multiple
...fine. open and close the lid a few times. can you hear any clicking noises, you should hear the lid engaging the lid switch. if the machine doent think lid is closed it wont funtion( safety
3,787 questions posted
Usually answered in minutes!
57 Questions
48 Questions
24 Questions
12 Questions