Whirlpool Cabrio WTW6600SBT Top Load Washer "remove tub" Questions

Ad

Question about Whirlpool Cabrio Washing Machines

1 Answer

...port- open the washer's main access panel and remove the large-diameter rubber hose that connects the pump to the bottom of the outer tub. Then,try to remove the clothing through the port. Good luck

Ad

Question about Whirlpool Cabrio Washing Machines

1 Answer

...outer tub port- open the washer's main access panel and remove the large-diameter rubber hose that connects the pump to the bottom of the outer tub. Then,try to remove the clothing through the

Ad

Question about Whirlpool Cabrio Washing Machines

2 Answers

...Remove the wash tub ring. This is the plastic ring around the perimeter of the top of the wash tub. There are a series of release tabs around the tub that you can pry with a screwdriver. NOTE: The ...

Question about Whirlpool Cabrio Washing Machines

2 Answers

...remove hose from tub and pump and empty coins. the inner tube would have to be removed which takes a special wrench. put back together. most of the coins and stuff should already be in the hose. make ...

Question about Whirlpool Cabrio Washing Machines

1 Answer

...remove inner tub and clean out metal, money or other stuff from bottom of outer tub, reinstall in reverse order.Once money has gotten into pump it can damage it, so replace it even though it looks ...

Question about Whirlpool Cabrio Washing Machines

1 Answer

...tub in but can't remove the smaller part of the main tub. Does this come out and is this the best way to clean the tub? no need to take out the tub you need to check the pump at the bottom tilt the ...

Question about Whirlpool Cabrio Washing Machines

1 Answer

...tub? If yes then open back of washer and remove drain pump (on left side) and pull off of tub and clear whatever is blocking its impeller. If the water is all gone and drained but pump stays on for ...

Question about Whirlpool Cabrio Washing Machines

1 Answer

...tub and remove 4) There is a white ring around the top that is clipped to the outer tub multiple places. Pull it out of the clip and remove this. 5) Lift the inner tub out 6) At the bottom of the ...

Question about Whirlpool Cabrio Washing Machines

1 Answer

...remove the Necklave. If its under the tub itself, you need to access it from underneath, which means you will need to take off the entire outside cover, starting with the top. Once you have removed ...

Question about Whirlpool Cabrio Washing Machines

2 Answers

...remove the hose while TUB IS EMPTY. ( i made mistake of removing hose with full tank and the washer thought it was empty and started spinning water out into floor. So, with empty tub I removed top ...

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

3,787 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...