Dremel Variable - Speed Multipro Rotary Tool 395 "coupling shaft" Questions

shaft. The flex coupling sits over the spline driver. Spline driver is about 1/4", hard plastic with grooves on the outside. Total shipping for orders under $ 5.00 is $ 2.50. Orders over $ 5.00 is $ 4

...coupling on the shaft had crumbled and the spline driver, which fits directly over the motor end of the shaft was somewhat worn. I emailed Dremel and got an overnight reply listing the 2 parts I need ...

...shaft. The flex coupling sits over the spline driver. Spline driver is about 1/4", hard plastic with grooves on the outside. Total shipping for orders under $ 5.00 is $ 2.50. Orders over $5.00 is $ ...

...SHAFT DISINTEGRATED I found a coupling part at ereplacementparts.com and the part number is 2615294309, but I would recommend calling Dremel direct at 1-800-437-3635 to ensure this is the right one. ...

...coupling between the motor shaft and chuck shaft availab le as a part? Try at eReplacementParts.com : Power Tool Parts and Tool Repair Diagrams. If you need more help come back.Post / thumbs / ...

Why does Flexshaft get hot after a couple seconds Dremel 4000 collet end hot. With flexshaft,the shaft very hot in seconds. This is Brand new. Dremel says they never ever heard of this problem . They ...

...Dremmel tech support FOR FREE and they told me what was broken - flex coupling between shaft and spindle. Only Dremmel model 395 type 2 and 3 have these couplings. Mailed out repair kit

...shaft there is too much pressure. Make sure the shafts are free of any debris from the original coupling, also check the bearings for wear or being so tight that they twist the coupling. Everything ...

...shaft. I need to replace this coupler due to it being stripped where it fits over the splines of the two shafts. Any ideas on where to get the part? I'm guessing, but I think that the Sears tool uses ...

...coupling The coupler nut tends to be screwwed on so tight that even when undone, the collet has bit into the soft shaft of the tool. Holding the rotation lock button in, grab the shank with some ...