Canon PIXMA MP530 All-In-One InkJet Printer "resetting replace roller message" Questions

Ink Absorbers almost full in Canon Pixma 1500 Is there no quicker/simpler way of getting at the absorber pads than taking the whole thing to bits as shown in a very interesting and helpful video foung

...roller gears manually to free the paper. Don't force anything, though. Do this step especially if the jam message comes up repeatedly without any obvious paper jam, there may be a small tear of paper ...

...roller gears manually to free the paper. Don't force anything, though. Do this step especially if the jam message comes up repeatedly without any obvious paper jam, there may be a small tear of paper ...

roller. You can either buy a replacement pad (search online) or gently wash out the original until it runs clear (I use dish soap and water, then rinse it with running water). Do not wring it dry; let

replace the ink cartridges. Towards the back you can see the paper start coming into the printer next to some rollers. On mine there was a small black switch about an inch from the right in the middle

...message V130 - check ink cartridge. I held down the stop/reset button for about 5-10 seconds and the problem was solved! I have had the same problem with my MP530. I called Canon technical support. I ...

...roller us usually enough. Mine is doing the exact same thing. I will try turning mine upside down as well.....Mine is doing this, as well as saying the paper is out in a message that pops up, but its ...

Replace the ink cartridge. By pressing the OK button, printing can be done without replacing the ink cartridge. However, the remaining ink amount cannot be detected properly, so the function to detect

message is "Paper Output Slot - Paper is jammed. Clear paper and press OK. On my computer, it calls this an error 1300. There is definitely no paper jammed! I checked everything. Is there some sort of

...replace? Hello, I will advice you Press and hold the "Resume" button on the printer. Press and hold the "Power" button while holding down "Resume." Release the "Resume" button. Press "Resume" twice. ...